Nos Abonnements
Ressources Électroniques
Détail de l'éditeur
Butterworth-Heinemann
localisé à :
Oxford ; Boston
Collections rattachées :
|
Documents disponibles chez cet éditeur (26)
Ajouter le résultat dans votre panier Faire une suggestion Affiner la recherche
Titre : Building services handbook Type de document : texte imprimé Auteurs : Hall , Fred, Auteur ; Greeno , Roger, Auteur Editeur : Oxford ; Boston : Butterworth-Heinemann Année de publication : 2001 Importance : 465 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-0-7506-4692-5 Note générale : La couv. porte en plus: "Incorporating current building & construction régulations"
IndexLangues : Anglais (eng) Mots-clés : Building -- Handbooks, manuals, etc.
Building management -- Handbooks, manuals, etc.
Facility management -- Handbooks, manuals, etc.Index. décimale : 696 Équipements, services, installations dans les bâtiments (sanitaire, gaz, vapeur, électricité). Travail du plombier, de l'électricien, d'autres corps de métiers.
Résumé :
The Building Services Handbook summarises concisely, in diagrams and brief explanations, all elements of building services. The book is a useful reference for professionals and students on advanced GNVQ level courses.Note de contenu :
* Part one: Cold water and supply systems.
* Part two: Hot water supply.
* Part three: Heating systems.
* Part four: Fuel characteristics and storage.
* Part Five: Ventilation systems.
* Part six: Air conditioning.
...Building services handbook [texte imprimé] / Hall , Fred, Auteur ; Greeno , Roger, Auteur . - Oxford ; Boston : Butterworth-Heinemann, 2001 . - 465 p. : ill. ; 24 cm.
ISBN : 978-0-7506-4692-5
La couv. porte en plus: "Incorporating current building & construction régulations"
Index
Langues : Anglais (eng)
Mots-clés : Building -- Handbooks, manuals, etc.
Building management -- Handbooks, manuals, etc.
Facility management -- Handbooks, manuals, etc.Index. décimale : 696 Équipements, services, installations dans les bâtiments (sanitaire, gaz, vapeur, électricité). Travail du plombier, de l'électricien, d'autres corps de métiers.
Résumé :
The Building Services Handbook summarises concisely, in diagrams and brief explanations, all elements of building services. The book is a useful reference for professionals and students on advanced GNVQ level courses.Note de contenu :
* Part one: Cold water and supply systems.
* Part two: Hot water supply.
* Part three: Heating systems.
* Part four: Fuel characteristics and storage.
* Part Five: Ventilation systems.
* Part six: Air conditioning.
...Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 045339 696 HAL Papier Bibliothèque Centrale Génie Civil Disponible Chemical engineering. Solutions to the problems in chemical engineering, volumes 2 (5th edition) and 3 (3rd edition) / John Metcalfe Coulson (2002)
Titre de série : Chemical engineering Titre : Solutions to the problems in chemical engineering, volumes 2 (5th edition) and 3 (3rd edition) Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; J.R. Backhurst, Auteur Editeur : Oxford ; Boston : Butterworth-Heinemann Année de publication : 2002 Importance : XI, 340 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7506-5639-9 Langues : Anglais (eng) Mots-clés : Génie chimique -- Problèmes et exercices
Chemical engineering -- Problems, exercises, etcIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Richardson et al provide the student of chemical engineering with full worked solutions to the problems posed in Chemical Engineering Volume 2 'Particle Technology and Separation Processes' 5th Edition, and Chemical Engineering Volume 3 'Chemical and Biochemical Reactors & Process Control' 3rd Edition. Whilst the main volumes contains illustrative worked examples throughout the text, this book contains answers to the more challenging questions posed at the end of each chapter of the main texts. These questions are of both a standard and non-standard nature, and so will prove to be of interest to both academic staff teaching courses in this area and to the keen student. Chemical engineers in industry who are looking for a standard solution to a real-life problem will also find the book of considerable interest. Note de contenu : Summary :
I. Solutions to Problems in Volume 2:
1. Particulate Solids.
2. Reduction and Enlargement of Particle Sizes.
3. Motion of Particles in a Fluid.
4. Flow of Fluids through Granular Beds and Packed Columns. - Sedimentation.
II. Solutions to Problems in Volume 3:
1. Reactor Design.
2. General Principles.
3. Flow Characteristics of Reactors.
4. Flow Modelling.
5. Solid Reactions and Reactors.Chemical engineering. Solutions to the problems in chemical engineering, volumes 2 (5th edition) and 3 (3rd edition) [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; J.R. Backhurst, Auteur . - Oxford ; Boston : Butterworth-Heinemann, 2002 . - XI, 340 p. : ill. ; 25 cm.
ISBN : 978-0-7506-5639-9
Langues : Anglais (eng)
Mots-clés : Génie chimique -- Problèmes et exercices
Chemical engineering -- Problems, exercises, etcIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Richardson et al provide the student of chemical engineering with full worked solutions to the problems posed in Chemical Engineering Volume 2 'Particle Technology and Separation Processes' 5th Edition, and Chemical Engineering Volume 3 'Chemical and Biochemical Reactors & Process Control' 3rd Edition. Whilst the main volumes contains illustrative worked examples throughout the text, this book contains answers to the more challenging questions posed at the end of each chapter of the main texts. These questions are of both a standard and non-standard nature, and so will prove to be of interest to both academic staff teaching courses in this area and to the keen student. Chemical engineers in industry who are looking for a standard solution to a real-life problem will also find the book of considerable interest. Note de contenu : Summary :
I. Solutions to Problems in Volume 2:
1. Particulate Solids.
2. Reduction and Enlargement of Particle Sizes.
3. Motion of Particles in a Fluid.
4. Flow of Fluids through Granular Beds and Packed Columns. - Sedimentation.
II. Solutions to Problems in Volume 3:
1. Reactor Design.
2. General Principles.
3. Flow Characteristics of Reactors.
4. Flow Modelling.
5. Solid Reactions and Reactors.Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 053265 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place
Titre de série : Chemical engineering, Vol. 2 Titre : Particle technology and separation processes Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur Mention d'édition : 5èmme éd. Editeur : Oxford ; Boston : Butterworth-Heinemann Année de publication : 2002 Importance : XXXIII, 1229 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7506-4445-7 Note générale : Bibliogr. en fin de chapitres. Index Langues : Anglais (eng) Mots-clés : Génie chimique
Chimie industrielle
Séparation (technologie)Index. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined.
The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described.
* A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced
* Reflects the growth in complexity and stature of chemical engineering over the last few years
* Supported with further reading at the end of each chapter and graded problems at the end of the bookNote de contenu : Summary :
1. Particulate Solids.
2. Particle size reduction and enlargement.
3. Motion of particles in a fluid.
4. Flow of fluids through granular beds and packed columns.
5. Sedimentation.
6. Fluidisation.
7. Liquid filtration.
8. Membrane separation processes.
9. Centrifugal separations.
10. Leaching.
11. Distillation.
12. Absorption of gases.
13. Liquid-liquid extraction.
14. Evaporation.
15. Crystallisation.
16. Drying.
17. Adsorption.
18. Ion Exchange.
19. Chromatographic separations.
20. Product design and process intensification.Chemical engineering, Vol. 2. Particle technology and separation processes [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur . - 5èmme éd. . - Oxford ; Boston : Butterworth-Heinemann, 2002 . - XXXIII, 1229 p. : ill. ; 25 cm.
ISBN : 978-0-7506-4445-7
Bibliogr. en fin de chapitres. Index
Langues : Anglais (eng)
Mots-clés : Génie chimique
Chimie industrielle
Séparation (technologie)Index. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined.
The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described.
* A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced
* Reflects the growth in complexity and stature of chemical engineering over the last few years
* Supported with further reading at the end of each chapter and graded problems at the end of the bookNote de contenu : Summary :
1. Particulate Solids.
2. Particle size reduction and enlargement.
3. Motion of particles in a fluid.
4. Flow of fluids through granular beds and packed columns.
5. Sedimentation.
6. Fluidisation.
7. Liquid filtration.
8. Membrane separation processes.
9. Centrifugal separations.
10. Leaching.
11. Distillation.
12. Absorption of gases.
13. Liquid-liquid extraction.
14. Evaporation.
15. Crystallisation.
16. Drying.
17. Adsorption.
18. Ion Exchange.
19. Chromatographic separations.
20. Product design and process intensification.Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 053266 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place
Titre : Defence electronics : standars and quality assurance Type de document : texte imprimé Auteurs : Ray Tricker, Auteur Editeur : Oxford ; Boston : Butterworth-Heinemann Année de publication : 1991 Importance : XXIII-378 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7506-0095-8 Note générale : Bibliogr. p. 349-354. Index Langues : Anglais (eng) Mots-clés : Electronics in military engineering
Electronic industries -- Quality controlIndex. décimale : 658.56:623 Résumé :
Defence Electronics: Standards and Quality Assurance is a reference manual for the standards and organizations involved in quality assurance in the general field of defense electronics. The book is comprised of 14 chapters that are organized into six parts.Note de contenu : Contents:
* Quality systems and control.
* Certification and purchasing of electronic components.
* Defence sale and quality in the UK.
* Selling to NATO.
* Standards worldwide: application and availability.
* The european defence market.Defence electronics : standars and quality assurance [texte imprimé] / Ray Tricker, Auteur . - Oxford ; Boston : Butterworth-Heinemann, 1991 . - XXIII-378 p. : ill. ; 25 cm.
ISBN : 978-0-7506-0095-8
Bibliogr. p. 349-354. Index
Langues : Anglais (eng)
Mots-clés : Electronics in military engineering
Electronic industries -- Quality controlIndex. décimale : 658.56:623 Résumé :
Defence Electronics: Standards and Quality Assurance is a reference manual for the standards and organizations involved in quality assurance in the general field of defense electronics. The book is comprised of 14 chapters that are organized into six parts.Note de contenu : Contents:
* Quality systems and control.
* Certification and purchasing of electronic components.
* Defence sale and quality in the UK.
* Selling to NATO.
* Standards worldwide: application and availability.
* The european defence market.Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 041680 658.56:623 TRI Papier Bibliothèque Centrale Génie Industriel Disponible
Titre : Digital systems : reference book Type de document : texte imprimé Auteurs : Holdsworth , Brian, Éditeur scientifique ; Martin , Graham R, Éditeur scientifique Editeur : Oxford ; Boston : Butterworth-Heinemann Année de publication : 1991 Importance : Pagination multiple Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-0-7506-1758-1 Note générale : Note bibliogr. Index Langues : Anglais (eng) Mots-clés : Digital electronics
Electronic digital computersIndex. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. photocellules. Accélérateur de particules. Tubes à rayons X Résumé :
Designed to provide comprehensive coverage of the field of digital systems in a concise but authoritative form. For ease of access the book has been divided into five parts: fundamentals; devices for digital systems; system design and techniques; system development; and applications.Note de contenu : Contents:
* Occupational health and safety.
* Fundamentals.
* Devices for digital systems.
* System design and techniques (software and hardware).
* System development.
* Applications.Digital systems : reference book [texte imprimé] / Holdsworth , Brian, Éditeur scientifique ; Martin , Graham R, Éditeur scientifique . - Oxford ; Boston : Butterworth-Heinemann, 1991 . - Pagination multiple : ill. ; 24 cm.
ISBN : 978-0-7506-1758-1
Note bibliogr. Index
Langues : Anglais (eng)
Mots-clés : Digital electronics
Electronic digital computersIndex. décimale : 621.38 Dispositifs électroniques. Tubes à électrons. photocellules. Accélérateur de particules. Tubes à rayons X Résumé :
Designed to provide comprehensive coverage of the field of digital systems in a concise but authoritative form. For ease of access the book has been divided into five parts: fundamentals; devices for digital systems; system design and techniques; system development; and applications.Note de contenu : Contents:
* Occupational health and safety.
* Fundamentals.
* Devices for digital systems.
* System design and techniques (software and hardware).
* System development.
* Applications.Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 041681 621.38 DIG Papier Bibliothèque Centrale Electrotechnique Disponible En bon état PermalinkPermalinkPermalinkPermalinkPermalinkPermalinkPermalinkPermalinkPermalinkPermalink
