Détail de l'éditeur
Van Nostrand Reinhold
localisé à :
London
Collections rattachées :
|
Documents disponibles chez cet éditeur (21)



Titre : Advanced dam engineering for design construction and rehabilitation Type de document : texte imprimé Auteurs : Robert B. Jansen, Éditeur scientifique Editeur : London : Van Nostrand Reinhold Année de publication : 1988 Importance : VII-811 p. Présentation : ill. Format : 30 cm ISBN/ISSN/EAN : 978-0-442-24397-5 Note générale : Index Langues : Anglais (eng) Mots-clés : Dams -- Design and construction
Barrages -- Conception et constructionIndex. décimale : 627 Ingénierie des cours d'eau naturels, des ports, des rades et des cotes. Installations de navigation, de dragage, de récupération et de sauvetage. Barrages et centrales électriques hydrauliques Résumé :
This book presents advances in dam engineering that have been achieved in recent years or are under way. attention is given to practical aspects of design, construction, operation, and rehabilitation. Case histories are reviewed to demonstrate principle and procedures of proven value. Lessons drawn from, or reinforced by, accidents and failures are examinedNote de contenu : Au sommaire :
- Lessons from notable events
- Hydrology
- Geology
- Seismology
- Materials
- Cofferdams
- Earthquake response analysis of embankments
...Advanced dam engineering for design construction and rehabilitation [texte imprimé] / Robert B. Jansen, Éditeur scientifique . - London : Van Nostrand Reinhold, 1988 . - VII-811 p. : ill. ; 30 cm.
ISBN : 978-0-442-24397-5
Index
Langues : Anglais (eng)
Mots-clés : Dams -- Design and construction
Barrages -- Conception et constructionIndex. décimale : 627 Ingénierie des cours d'eau naturels, des ports, des rades et des cotes. Installations de navigation, de dragage, de récupération et de sauvetage. Barrages et centrales électriques hydrauliques Résumé :
This book presents advances in dam engineering that have been achieved in recent years or are under way. attention is given to practical aspects of design, construction, operation, and rehabilitation. Case histories are reviewed to demonstrate principle and procedures of proven value. Lessons drawn from, or reinforced by, accidents and failures are examinedNote de contenu : Au sommaire :
- Lessons from notable events
- Hydrology
- Geology
- Seismology
- Materials
- Cofferdams
- Earthquake response analysis of embankments
...Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 040437 627 ADV Papier Bibliothèque Centrale Hydraulique Disponible En bon état 040438 627 ADV Papier Bibliothèque Centrale Hydraulique Disponible En bon état
Titre : Air pollution modeling : theories, computational methods and available software Type de document : texte imprimé Auteurs : Paolo Zannetti, Auteur Editeur : Southampton : Computational Mechanics Publications Année de publication : 1990 Autre Editeur : London : Van Nostrand Reinhold Importance : 444 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-1-85312-100-5 Note générale : Bibliogr. p. 422-425. Index Langues : Anglais (eng) Mots-clés : Pollution -- Lutte contre
Atmosphère -- PollutionIndex. décimale : 614.7 Hygiène de l'air du sol et de l'eau. Pollution et contrôle de la pollution. Résumé : Mathematical modeling of air pollution has grown enormously over the last two decades in response to ever-increasing demands to understand and manage air resources. Air pollution modeling, the first comprehensive text on this subject, provides both an historical perspective on the evolution of mathematical modeling techniques as well as a carefully- developed survey of contemporary modeling methods. Note de contenu : Contents:
* The problem- Air pollution.
* The tool- Mathematical modeling.
* Air pollution meteorology.
* Meteorological modeling.
* Plume rise.
* Eulerian dispersion models.
* Gaussian models.
* Lagrangain dispersion models.
* Atmospheric chemistry.
...Air pollution modeling : theories, computational methods and available software [texte imprimé] / Paolo Zannetti, Auteur . - Southampton : Computational Mechanics Publications : London : Van Nostrand Reinhold, 1990 . - 444 p. : ill. ; 25 cm.
ISBN : 978-1-85312-100-5
Bibliogr. p. 422-425. Index
Langues : Anglais (eng)
Mots-clés : Pollution -- Lutte contre
Atmosphère -- PollutionIndex. décimale : 614.7 Hygiène de l'air du sol et de l'eau. Pollution et contrôle de la pollution. Résumé : Mathematical modeling of air pollution has grown enormously over the last two decades in response to ever-increasing demands to understand and manage air resources. Air pollution modeling, the first comprehensive text on this subject, provides both an historical perspective on the evolution of mathematical modeling techniques as well as a carefully- developed survey of contemporary modeling methods. Note de contenu : Contents:
* The problem- Air pollution.
* The tool- Mathematical modeling.
* Air pollution meteorology.
* Meteorological modeling.
* Plume rise.
* Eulerian dispersion models.
* Gaussian models.
* Lagrangain dispersion models.
* Atmospheric chemistry.
...Réservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 041707 614.7 ZAN Papier Bibliothèque Centrale Génie de l'Environnement Disponible
Titre : An intrduction to the properties of engineering materials Type de document : texte imprimé Auteurs : K. J. Pascoe, Auteur Mention d'édition : 2nd ed Editeur : London : Van Nostrand Reinhold Année de publication : 1978 Importance : 439 p. Présentation : ill. Format : 23 cm ISBN/ISSN/EAN : 978-0-442-30240-5 Note générale : Index Langues : Anglais (eng) Mots-clés : Materials.
Metals.Index. décimale : 620.17 Mesure des propriétés mécaniques des matériaux. Essais de résistance. Résumé : This undergraduate text aims to provide an understanding of show the properties on engineering materials depend on the structure at the atomic, molecular, microscopic and microscopic levels.
The first part of the book deals with topics are mainly fundamental physics. The second part is more technological in nature, covering the mechanical testing of metals, the treatment of steels, electrochemical phenomena, and inorganic and organic materials used in engineering.Note de contenu :
Sommaire:
Chapitre 1: Introduction
Chapitre 2: Atomic structure
Chapitre 3: Aaggregations of atoms-The fluids states
Chapitre 4: Aggregations of atoms-Solids
Chapitre 5: Crystal growth and size
Chapitre 6: Aggregations of two sorts of atoms-Binary alloys
Chapitre 7: Equilibrium diagrams
Chapitre 8: The iron-carbon system
Chapitre 9: Thermal energy
Chapitre 10: The deformation of metal single crystals
Chapitre 11: The strengthening of metals
Chapitre 12: Mechanical testing of polycrystalline meterials
Chapitre 13: Plastic flow and facture
Chapitre 14: Fatigue
Chapitre 15: Creep
Chapitre 16: Heat treatment of steel
Chapitre 17: Alloys steels
Chapitre 18: Corrosion
Chapitre 19: Welding
Chapitre 20: Inorganic non-metallic materials
Chapitre 21: Organic materials
Chapitre 22: Composotes
Chapitre 23: The nucleusAn intrduction to the properties of engineering materials [texte imprimé] / K. J. Pascoe, Auteur . - 2nd ed . - London : Van Nostrand Reinhold, 1978 . - 439 p. : ill. ; 23 cm.
ISBN : 978-0-442-30240-5
Index
Langues : Anglais (eng)
Mots-clés : Materials.
Metals.Index. décimale : 620.17 Mesure des propriétés mécaniques des matériaux. Essais de résistance. Résumé : This undergraduate text aims to provide an understanding of show the properties on engineering materials depend on the structure at the atomic, molecular, microscopic and microscopic levels.
The first part of the book deals with topics are mainly fundamental physics. The second part is more technological in nature, covering the mechanical testing of metals, the treatment of steels, electrochemical phenomena, and inorganic and organic materials used in engineering.Note de contenu :
Sommaire:
Chapitre 1: Introduction
Chapitre 2: Atomic structure
Chapitre 3: Aaggregations of atoms-The fluids states
Chapitre 4: Aggregations of atoms-Solids
Chapitre 5: Crystal growth and size
Chapitre 6: Aggregations of two sorts of atoms-Binary alloys
Chapitre 7: Equilibrium diagrams
Chapitre 8: The iron-carbon system
Chapitre 9: Thermal energy
Chapitre 10: The deformation of metal single crystals
Chapitre 11: The strengthening of metals
Chapitre 12: Mechanical testing of polycrystalline meterials
Chapitre 13: Plastic flow and facture
Chapitre 14: Fatigue
Chapitre 15: Creep
Chapitre 16: Heat treatment of steel
Chapitre 17: Alloys steels
Chapitre 18: Corrosion
Chapitre 19: Welding
Chapitre 20: Inorganic non-metallic materials
Chapitre 21: Organic materials
Chapitre 22: Composotes
Chapitre 23: The nucleusRéservation
Réserver ce document
Exemplaires (1)
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 035134 620.17 PAS Papier Bibliothèque Centrale SC. Matériaux Disponible
Titre : Analysis of Framed Structures Type de document : texte imprimé Auteurs : James M. Gere, Auteur ; William Weaver, Jr Editeur : London : Van Nostrand Reinhold Année de publication : 1965 Importance : XI-475 p Note générale : Index. Langues : Anglais (eng) Mots-clés : G. Civil Construction Analyse Structure. Index. décimale : 693.8 Construction en acier, en métal. Résumé : Index. Analysis of Framed Structures [texte imprimé] / James M. Gere, Auteur ; William Weaver, Jr . - London : Van Nostrand Reinhold, 1965 . - XI-475 p.
Index.
Langues : Anglais (eng)
Mots-clés : G. Civil Construction Analyse Structure. Index. décimale : 693.8 Construction en acier, en métal. Résumé : Index. Réservation
Réserver ce document
Exemplaires (3)
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 014467 693.8 GER Papier Bibliothèque Centrale Génie Civil Disponible 014466 693.8 GER Papier Bibliothèque Centrale Génie Civil Disponible 014468 693.8 GER Papier Bibliothèque Centrale Génie Civil Disponible
Titre : Applied metallography Type de document : texte imprimé Auteurs : George F. Vander Voort, Éditeur scientifique Editeur : London : Van Nostrand Reinhold Année de publication : 1986 Importance : VIII-301 p. Présentation : ill. Format : 29 cm ISBN/ISSN/EAN : 978-0-442-28836-5 Note générale : Bibliogr. p. 295-296. Index Langues : Anglais (eng) Mots-clés : Metallography -- Technique
Physical metallurgy -- Technique
Métallurgie physiqueIndex. décimale : 620.18 Analyse de la structure des matériaux. Métallographie Résumé :
This book should be of interest to practising engineers in metallurgy and materials science, mechanical engineers, chemical engineers involved with corrosion and inorganic chemistry, industry engineers in the steel and metal alloy business.Note de contenu : Contents:
* Phase identification by selective.
* Potentiostatic teching.
* Applications of the interference layer method.
* Magnetic etching.
* The gas_contrasting method.
...Applied metallography [texte imprimé] / George F. Vander Voort, Éditeur scientifique . - London : Van Nostrand Reinhold, 1986 . - VIII-301 p. : ill. ; 29 cm.
ISBN : 978-0-442-28836-5
Bibliogr. p. 295-296. Index
Langues : Anglais (eng)
Mots-clés : Metallography -- Technique
Physical metallurgy -- Technique
Métallurgie physiqueIndex. décimale : 620.18 Analyse de la structure des matériaux. Métallographie Résumé :
This book should be of interest to practising engineers in metallurgy and materials science, mechanical engineers, chemical engineers involved with corrosion and inorganic chemistry, industry engineers in the steel and metal alloy business.Note de contenu : Contents:
* Phase identification by selective.
* Potentiostatic teching.
* Applications of the interference layer method.
* Magnetic etching.
* The gas_contrasting method.
...Réservation
Réserver ce document
Exemplaires (2)
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 042253 620.18 APP Papier Bibliothèque Centrale Métallurgie Disponible En bon état 041743 620.18 APP Papier Bibliothèque Centrale Métallurgie Disponible En bon état PermalinkPermalinkPermalinkPermalinkPermalinkPermalinkPermalinkPermalinkMathematics dictionary (1968)
PermalinkMeasurement of man at work / Symposium on psychological versus physiological criteria in man-machine systems (Septembre 1969; Amsterdam) (1971)
Permalink