Documents disponibles écrits par cet auteur

Rock mechanics, vol. 1. Theoretical fundamentals / Philippe A. Charlez

Public ISBD Titre de série : Rock mechanics, vol. 1 Titre : Theoretical fundamentals Type de document : texte imprimé Auteurs : Philippe A. Charlez, Auteur ; Vincent Maury, Préfacier, etc. Editeur : Paris : Technip Année de publication : 1991 Importance : XXIII-333 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-2-7108-0585-4 Note générale : 2-7108-0584-7 (éd. complète) Bibliogr. Index Langues : Anglais (eng) Mots-clés : Roches,  Mécanique  des Index. décimale : 624.12 Ingénierie et mécanique des roches. Résumé : After a short and classical review of the mechanics of continuous media, the main constitutive laws independent of time are presented from the smplest linear elesticity to the more complex thermoporoelasticity. Finally, the third part deals with the notion of rupture through classical fracture mechanics as well as damage and bifuraction theories. In particular, the last chapitre is entirely devoted to the crucial problem of shearing bands. this book is intended for engineers, teachers, graduates and Ph.D students in geomechanics. they will find in it a way to review quickly their knowledge on possibly forgotten or neglected theories Note de contenu : Au sommaire : I Mechanics of continuous media basic concepts - State of strain - State of stress - Thermodynamics of continuous media II, Mechanism of material strain - Linear elasticity, general theory - Plane theory of elasticity - Behaviour of a material containing cavities - Thermodynamics of saturated porous media - Infinitesimal thermoporoelasticity - The triaxial test and the measurement of thermoporoelastic properties - Thermoporoelasticity. General theory and application III, Mechanics of material cohesion loss - Fissuring - Introduction to damage theory - Appearance of shearing bands in geomaterials Rock mechanics, vol. 1. Theoretical fundamentals [texte imprimé] / Philippe A. Charlez, Auteur ; Vincent Maury, Préfacier, etc. . - Paris : Technip, 1991 . - XXIII-333 p. : ill. ; 24 cm. ISBN : 978-2-7108-0585-4 2-7108-0584-7 (éd. complète) Bibliogr. Index Langues : Anglais (eng) Mots-clés : Roches,  Mécanique  des Index. décimale : 624.12 Ingénierie et mécanique des roches. Résumé : After a short and classical review of the mechanics of continuous media, the main constitutive laws independent of time are presented from the smplest linear elesticity to the more complex thermoporoelasticity. Finally, the third part deals with the notion of rupture through classical fracture mechanics as well as damage and bifuraction theories. In particular, the last chapitre is entirely devoted to the crucial problem of shearing bands. this book is intended for engineers, teachers, graduates and Ph.D students in geomechanics. they will find in it a way to review quickly their knowledge on possibly forgotten or neglected theories Note de contenu : Au sommaire : I Mechanics of continuous media basic concepts - State of strain - State of stress - Thermodynamics of continuous media II, Mechanism of material strain - Linear elasticity, general theory - Plane theory of elasticity - Behaviour of a material containing cavities - Thermodynamics of saturated porous media - Infinitesimal thermoporoelasticity - The triaxial test and the measurement of thermoporoelastic properties - Thermoporoelasticity. General theory and application III, Mechanics of material cohesion loss - Fissuring - Introduction to damage theory - Appearance of shearing bands in geomaterials

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité	Etat_Exemplaire
040284	624.12 CHA	Papier	Bibliothèque Centrale	Génie Civil	Disponible	En bon état
046443	624.12 CHA	Papier	Bibliothèque Centrale	Génie Civil	Disponible	En bon état

Rock mechanics, Vol. 2. Petroleum applications / Philippe A. Charlez

Public ISBD Titre de série : Rock mechanics, Vol. 2 Titre : Petroleum applications Type de document : texte imprimé Auteurs : Philippe A. Charlez, Auteur ; Charles Fairhurst, Préfacier, etc. Editeur : Paris : Technip Année de publication : 1997 Importance : XXXIII-661 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-2-7108-0586-1 Note générale : Bibliogr. Index Langues : Anglais (eng) Mots-clés : Pétroles  --  Puits  --  Forage Roches,  Mécanique  des Pétrole,  Technique  du Gisements  pétrolifères,  Étude  des Index. décimale : 550.832 Méthodes géophysiques d'examen des puits. Forages Résumé : This second book focuses on three major themes: derrilling-well activities, hydraulic facturing and reservoir engineering After an oerview of thermoporomechanic fundamentals, the reader can tackle the question of borehole stability in poroelastic rocks. particular attention is devoted to drilling in highly tectonic regions. Chapitre 4 discusses the start-up of a well developing the concept of pore pressure/deformation coupling, the geomechanical solution in compared with those taken from reservoir engineering and well testing, extends solutions to thermal problems, two chapitres 6 and7 are entirely devoted to hydraulic fracturing. Innovative applications such as stress mesurements, drilling cuttings reijection, acid facturing and thermal induced facturing relaited to water injection are discussed in great detail. The second part of the book covers non-linear anelastic phenomena such as broehle stability in plastic rocks, production of poroplastic reservoirs, effect of compaction on recovery, sand production and casing collapse in salt formations. The last chapitre, paradoxically called initial state, describes the main mechanisms which generate the stresses in the earth crust from a few simple elements of global tectonics as well as the various origins of abnormal pore pressures Note de contenu : - Validation of Thermoporelastic hypothèses - The Thermoporelastic wellbore problem - Drilling an open hole well in a brittle thermoporoelastic rock - Starte-up of producing well - Hydraulic fracturing - Some interesting applications of hydraulic fracturing - Validation of the principal porplastic hypotheses - Borehole stability in porplastic materials - Initial state Rock mechanics, Vol. 2. Petroleum applications [texte imprimé] / Philippe A. Charlez, Auteur ; Charles Fairhurst, Préfacier, etc. . - Paris : Technip, 1997 . - XXXIII-661 p. : ill. ; 24 cm. ISBN : 978-2-7108-0586-1 Bibliogr. Index Langues : Anglais (eng) Mots-clés : Pétroles  --  Puits  --  Forage Roches,  Mécanique  des Pétrole,  Technique  du Gisements  pétrolifères,  Étude  des Index. décimale : 550.832 Méthodes géophysiques d'examen des puits. Forages Résumé : This second book focuses on three major themes: derrilling-well activities, hydraulic facturing and reservoir engineering After an oerview of thermoporomechanic fundamentals, the reader can tackle the question of borehole stability in poroelastic rocks. particular attention is devoted to drilling in highly tectonic regions. Chapitre 4 discusses the start-up of a well developing the concept of pore pressure/deformation coupling, the geomechanical solution in compared with those taken from reservoir engineering and well testing, extends solutions to thermal problems, two chapitres 6 and7 are entirely devoted to hydraulic fracturing. Innovative applications such as stress mesurements, drilling cuttings reijection, acid facturing and thermal induced facturing relaited to water injection are discussed in great detail. The second part of the book covers non-linear anelastic phenomena such as broehle stability in plastic rocks, production of poroplastic reservoirs, effect of compaction on recovery, sand production and casing collapse in salt formations. The last chapitre, paradoxically called initial state, describes the main mechanisms which generate the stresses in the earth crust from a few simple elements of global tectonics as well as the various origins of abnormal pore pressures Note de contenu : - Validation of Thermoporelastic hypothèses - The Thermoporelastic wellbore problem - Drilling an open hole well in a brittle thermoporoelastic rock - Starte-up of producing well - Hydraulic fracturing - Some interesting applications of hydraulic fracturing - Validation of the principal porplastic hypotheses - Borehole stability in porplastic materials - Initial state

Exemplaires

Code-barres	Cote	Support	Localisation	Section	Disponibilité	Etat_Exemplaire
046442	550.832 CHA	Papier	Bibliothèque Centrale	Génie Civil	Disponible