Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
. Bibliothèque Centrale
Génie Chimique > Travail et méthodes de l'ingénieur-chimiste
Scaleup of chemical processes / Bisio , Attilio
Titre : Scaleup of chemical processes : conversion from laboratory scale tests to successful commercial size design Type de document : texte imprimé Auteurs : Bisio , Attilio, Auteur ; Kabel , Robert L., Auteur Editeur : New York : Wiley Année de publication : 1985 Importance : XVIII-699 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-0-471-05747-5 Note générale : Bibliogr. 690p.-Index Langues : Français (fre) Mots-clés : Génie chimique--Productivité procédés--Transfer Processes Index. décimale : 66.012.7 Résumé : Mixing in Continuous Flow Systems E. B. Nanman and B. A. Buffham This groundbreaking introductory study lets engineers and research scientists design and analyze complex flow and reaction systems, even with limited data. Specifically dealing with mixing effects important to the design of chemical reactors, it uses systems models typical of any large chemical plant or oil refinery to examine temporal mixing, or the mixing among particles or any conserved entities that have remained in the system for different lengths of time. In addition, it views mixing from a spatial perspective, treating it as a process that brings system components into closer physical proximity. Plus it reports the first steps toward unification of the temporal and spatial viewpoints of mixing. 1983 (0 471-86191-X) 271 pp. Structural Analysis and Design of Process Equipment Maan H. Jawad and James R. Farr Here is the most practical, up-to-date source available for information on the analysis and design of process equipment. It provides practicing engineers with clear guidance to the latest ASME Boiler and Vessel Code and offers advanced engineering students a concise introduction to the basic equations and rules used in the design of process vessels and components. Topics covered include a general introduction to the tools of the trade…an outline of the basic theory of plates and shells…a detailed analysis and design of components, defining procedures for designing vessel supports and illustrating the evaluation of stress due to wind and earthquake loads…and the design and analysis of specialized equipment, including tubesheet design in heat transfer equipment. 1984 (0 471-09207-X) 704 pp. Gas Treating with Chemical Solvents G. Astarita, D. W. Savage, and A. Bisio This rigorous blend of theory and practice provides a rational analysis of gas treating processes in which liquids are used to absorb acid gases from gaseous streams. It emphasizes those aspects unique to the use of chemically reactive solvents—liquids containing components that react chemically with the acid gases after they dissolve in the liquid phase And it also treats those aspects common to purely physical acid gas absorption processes. An ideal text for graduate students with a working knowledge of physical chemistry, classical gas absorption and mass transfer processes, it constitutes an exhaustive treatment of four important areas: industrial gas treating, theory, applications, and industrial problems. 1983 (0 471-05768-1) 493 pp. Note de contenu : Sommaire:
1.Introduction to Scaleup
2.Mathematical Modeling
3.Reaction Kinetics
4.Homogeneous Reaction Systems
5.Reactors for Fluid-Phase Processes Catalyzed by Solids
6.Fluid-Fluid Reactors
7.Selection of Reactor Types
8.Flow Patterns and Residence Time Distributions
9.Mixing Processes
10.Fluidized Beds
11.Laminar Flow Processes
12.Stagewise Mass Transfer Processes
13.Continuous Mass Transfer Processes
14.Solid-Liquid Separation Processes
15.The Environmental Challenges of Scaleup
16.Evaluating Materials of Construction in Pilot Plant Corrosion Tests
17.Gaining Experience Through Pilot Plants and Demonstration Units
18.Scaleup: Overview, Closing Remarks, and CautionsISBN 13 : 978-0471057475 Scaleup of chemical processes : conversion from laboratory scale tests to successful commercial size design [texte imprimé] / Bisio , Attilio, Auteur ; Kabel , Robert L., Auteur . - New York : Wiley, 1985 . - XVIII-699 p. : ill. ; 24 cm.
ISBN : 978-0-471-05747-5
Bibliogr. 690p.-Index
Langues : Français (fre)
Mots-clés : Génie chimique--Productivité procédés--Transfer Processes Index. décimale : 66.012.7 Résumé : Mixing in Continuous Flow Systems E. B. Nanman and B. A. Buffham This groundbreaking introductory study lets engineers and research scientists design and analyze complex flow and reaction systems, even with limited data. Specifically dealing with mixing effects important to the design of chemical reactors, it uses systems models typical of any large chemical plant or oil refinery to examine temporal mixing, or the mixing among particles or any conserved entities that have remained in the system for different lengths of time. In addition, it views mixing from a spatial perspective, treating it as a process that brings system components into closer physical proximity. Plus it reports the first steps toward unification of the temporal and spatial viewpoints of mixing. 1983 (0 471-86191-X) 271 pp. Structural Analysis and Design of Process Equipment Maan H. Jawad and James R. Farr Here is the most practical, up-to-date source available for information on the analysis and design of process equipment. It provides practicing engineers with clear guidance to the latest ASME Boiler and Vessel Code and offers advanced engineering students a concise introduction to the basic equations and rules used in the design of process vessels and components. Topics covered include a general introduction to the tools of the trade…an outline of the basic theory of plates and shells…a detailed analysis and design of components, defining procedures for designing vessel supports and illustrating the evaluation of stress due to wind and earthquake loads…and the design and analysis of specialized equipment, including tubesheet design in heat transfer equipment. 1984 (0 471-09207-X) 704 pp. Gas Treating with Chemical Solvents G. Astarita, D. W. Savage, and A. Bisio This rigorous blend of theory and practice provides a rational analysis of gas treating processes in which liquids are used to absorb acid gases from gaseous streams. It emphasizes those aspects unique to the use of chemically reactive solvents—liquids containing components that react chemically with the acid gases after they dissolve in the liquid phase And it also treats those aspects common to purely physical acid gas absorption processes. An ideal text for graduate students with a working knowledge of physical chemistry, classical gas absorption and mass transfer processes, it constitutes an exhaustive treatment of four important areas: industrial gas treating, theory, applications, and industrial problems. 1983 (0 471-05768-1) 493 pp. Note de contenu : Sommaire:
1.Introduction to Scaleup
2.Mathematical Modeling
3.Reaction Kinetics
4.Homogeneous Reaction Systems
5.Reactors for Fluid-Phase Processes Catalyzed by Solids
6.Fluid-Fluid Reactors
7.Selection of Reactor Types
8.Flow Patterns and Residence Time Distributions
9.Mixing Processes
10.Fluidized Beds
11.Laminar Flow Processes
12.Stagewise Mass Transfer Processes
13.Continuous Mass Transfer Processes
14.Solid-Liquid Separation Processes
15.The Environmental Challenges of Scaleup
16.Evaluating Materials of Construction in Pilot Plant Corrosion Tests
17.Gaining Experience Through Pilot Plants and Demonstration Units
18.Scaleup: Overview, Closing Remarks, and CautionsISBN 13 : 978-0471057475 Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 044595 66.012.7 BIS Papier Bibliothèque Centrale Génie Chimique Disponible Shreve's chemical process industries / George T. Austin
Titre : Shreve's chemical process industries Type de document : texte imprimé Auteurs : George T. Austin, Auteur Mention d'édition : 5 éd Editeur : New York : McGraw-Hill Année de publication : 1984 Importance : XIII-859 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-0-07-057147-1 Note générale : Index Langues : Anglais (eng) Mots-clés : Chemistry, Technical
Chemical industry
Industries chimiques
Génie chimiqueIndex. décimale : 66.013 Usines chimiques en général. Manufactures chimiques. Unités de production. Résumé :
It was a privilege to work with R. Norris Shreve, and i hope that his influence is reflected in this, the fifth edition. Dr. Joseph A.Brink, another of professor Shreve's students and the editor of the fourth edition, has unfortunately also passed on. It is regrettable that his abilities and expertise are no longer available.Note de contenu : Sommaire :
* Chemical processing
* Water conditioning and environmental protection
* Energy, fuels, air conditioning, and refrigeration
* Coal chemicals
* Fuel gases
...Shreve's chemical process industries [texte imprimé] / George T. Austin, Auteur . - 5 éd . - New York : McGraw-Hill, 1984 . - XIII-859 p. : ill. ; 24 cm.
ISBN : 978-0-07-057147-1
Index
Langues : Anglais (eng)
Mots-clés : Chemistry, Technical
Chemical industry
Industries chimiques
Génie chimiqueIndex. décimale : 66.013 Usines chimiques en général. Manufactures chimiques. Unités de production. Résumé :
It was a privilege to work with R. Norris Shreve, and i hope that his influence is reflected in this, the fifth edition. Dr. Joseph A.Brink, another of professor Shreve's students and the editor of the fourth edition, has unfortunately also passed on. It is regrettable that his abilities and expertise are no longer available.Note de contenu : Sommaire :
* Chemical processing
* Water conditioning and environmental protection
* Energy, fuels, air conditioning, and refrigeration
* Coal chemicals
* Fuel gases
...Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 030418 66.013 AUS Papier Bibliothèque Centrale Génie Chimique Disponible 030419 66.013 AUS Papier Bibliothèque Centrale Génie Chimique Disponible L'usinage électrochimiques / Barr , A.-E.DE
Titre : L'usinage électrochimiques Type de document : texte imprimé Auteurs : Barr , A.-E.DE, Auteur ; Oliver , D .-A, Auteur Editeur : Paris : Eyrolles Année de publication : 1971 Importance : 256 p. Présentation : ill. Format : 24 cm Note générale : Bibliogr. p. 251-252 Langues : Français (fre) Mots-clés : Usinage
Électrochimie industrielleIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Au cours ds dernières années, de nouvelles méthodes d'usinage se sont instaurés et développées pour résoudre les problèmes posés par l'emploi croissant de métaux difficiles à usiner ainsi que des alliages tels que les aciers inoxydables, les Nimonics et le titane, particulièrement dans les industries de technique avancée. Note de contenu : Sommaire :
Chapitre 1: Méthodes d'usinage chimique et électronique
Chapitre 2: Théorie simple de l'usinage électronique
Chapitre 3: L'intervalle de travail
Chapitre 4: Électrochimie
Chapitre 5: Électrolytes pour l'usinage électrochimique
Chapitre 6: Le traitement des solutions électrochimique
Chapitre 7: Le traitement des solutions électrolytiques usagées
...L'usinage électrochimiques [texte imprimé] / Barr , A.-E.DE, Auteur ; Oliver , D .-A, Auteur . - Paris : Eyrolles, 1971 . - 256 p. : ill. ; 24 cm.
Bibliogr. p. 251-252
Langues : Français (fre)
Mots-clés : Usinage
Électrochimie industrielleIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Au cours ds dernières années, de nouvelles méthodes d'usinage se sont instaurés et développées pour résoudre les problèmes posés par l'emploi croissant de métaux difficiles à usiner ainsi que des alliages tels que les aciers inoxydables, les Nimonics et le titane, particulièrement dans les industries de technique avancée. Note de contenu : Sommaire :
Chapitre 1: Méthodes d'usinage chimique et électronique
Chapitre 2: Théorie simple de l'usinage électronique
Chapitre 3: L'intervalle de travail
Chapitre 4: Électrochimie
Chapitre 5: Électrolytes pour l'usinage électrochimique
Chapitre 6: Le traitement des solutions électrochimique
Chapitre 7: Le traitement des solutions électrolytiques usagées
...Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 032775 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible 032773 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 032772 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible 032774 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible 032771 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible 027354 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible 027352 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible 027353 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 027355 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible 027351 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible 034882 66.01 BAR Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Chemical engineering. Solutions to the problems in chemical engineering, volumes 2 (5th edition) and 3 (3rd edition) / John Metcalfe Coulson
Titre de série : Chemical engineering Titre : Solutions to the problems in chemical engineering, volumes 2 (5th edition) and 3 (3rd edition) Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; J.R. Backhurst, Auteur Editeur : Oxford ; Boston : Butterworth-Heinemann Année de publication : 2002 Importance : XI, 340 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7506-5639-9 Langues : Anglais (eng) Mots-clés : Génie chimique -- Problèmes et exercices
Chemical engineering -- Problems, exercises, etcIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Richardson et al provide the student of chemical engineering with full worked solutions to the problems posed in Chemical Engineering Volume 2 'Particle Technology and Separation Processes' 5th Edition, and Chemical Engineering Volume 3 'Chemical and Biochemical Reactors & Process Control' 3rd Edition. Whilst the main volumes contains illustrative worked examples throughout the text, this book contains answers to the more challenging questions posed at the end of each chapter of the main texts. These questions are of both a standard and non-standard nature, and so will prove to be of interest to both academic staff teaching courses in this area and to the keen student. Chemical engineers in industry who are looking for a standard solution to a real-life problem will also find the book of considerable interest. Note de contenu : Summary :
I. Solutions to Problems in Volume 2:
1. Particulate Solids.
2. Reduction and Enlargement of Particle Sizes.
3. Motion of Particles in a Fluid.
4. Flow of Fluids through Granular Beds and Packed Columns. - Sedimentation.
II. Solutions to Problems in Volume 3:
1. Reactor Design.
2. General Principles.
3. Flow Characteristics of Reactors.
4. Flow Modelling.
5. Solid Reactions and Reactors.Chemical engineering. Solutions to the problems in chemical engineering, volumes 2 (5th edition) and 3 (3rd edition) [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; J.R. Backhurst, Auteur . - Oxford ; Boston : Butterworth-Heinemann, 2002 . - XI, 340 p. : ill. ; 25 cm.
ISBN : 978-0-7506-5639-9
Langues : Anglais (eng)
Mots-clés : Génie chimique -- Problèmes et exercices
Chemical engineering -- Problems, exercises, etcIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Richardson et al provide the student of chemical engineering with full worked solutions to the problems posed in Chemical Engineering Volume 2 'Particle Technology and Separation Processes' 5th Edition, and Chemical Engineering Volume 3 'Chemical and Biochemical Reactors & Process Control' 3rd Edition. Whilst the main volumes contains illustrative worked examples throughout the text, this book contains answers to the more challenging questions posed at the end of each chapter of the main texts. These questions are of both a standard and non-standard nature, and so will prove to be of interest to both academic staff teaching courses in this area and to the keen student. Chemical engineers in industry who are looking for a standard solution to a real-life problem will also find the book of considerable interest. Note de contenu : Summary :
I. Solutions to Problems in Volume 2:
1. Particulate Solids.
2. Reduction and Enlargement of Particle Sizes.
3. Motion of Particles in a Fluid.
4. Flow of Fluids through Granular Beds and Packed Columns. - Sedimentation.
II. Solutions to Problems in Volume 3:
1. Reactor Design.
2. General Principles.
3. Flow Characteristics of Reactors.
4. Flow Modelling.
5. Solid Reactions and Reactors.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 053265 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place Chemical engineering, Vol. 1. Fluid flow, heat transfer and mass transfer / John Metcalfe Coulson
Titre de série : Chemical engineering, Vol. 1 Titre : Fluid flow, heat transfer and mass transfer Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Editeur scientifique ; John Hadlett Harker, Editeur scientifique Mention d'édition : 3 éd Editeur : Oxford : Pergamon press Année de publication : 1977 Importance : xvii-449 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-08-021015-5 Langues : Anglais (eng) Mots-clés : Génie chimique
Thermocinétique
Transfert de masse
Fluides, Mécanique desIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
It is the purpose of the present work to present to the student an account of the fundamentals operations froms a major feature of chemical engineering technology. This volum is divided into four sections, fluid flow, heat transfer, mass transfer and humidification. Since the chemical engineer must handle fluids of all kinds, including compressible gases at high pressures, we belive that it is a good plan to consider the problem from a thermodynamic aspect and to derive general equations for which can be used in a wide range of circumstances.Note de contenu : Au sommaire :
- Units and dimensions
- Flow of fluids - energy and moentum relationships
- Friction in pipes and channels
- Flow of compressible fluids nad two-phase flow
- Flow and pressure measurement
- Heat transfer
- Mass transfer
- The boundary layer an pipe flow
- Momentum, heat and mass transfer
- Humidification and water coolingChemical engineering, Vol. 1. Fluid flow, heat transfer and mass transfer [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Editeur scientifique ; John Hadlett Harker, Editeur scientifique . - 3 éd . - Oxford : Pergamon press, 1977 . - xvii-449 p. : ill. ; 25 cm.
ISBN : 978-0-08-021015-5
Langues : Anglais (eng)
Mots-clés : Génie chimique
Thermocinétique
Transfert de masse
Fluides, Mécanique desIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
It is the purpose of the present work to present to the student an account of the fundamentals operations froms a major feature of chemical engineering technology. This volum is divided into four sections, fluid flow, heat transfer, mass transfer and humidification. Since the chemical engineer must handle fluids of all kinds, including compressible gases at high pressures, we belive that it is a good plan to consider the problem from a thermodynamic aspect and to derive general equations for which can be used in a wide range of circumstances.Note de contenu : Au sommaire :
- Units and dimensions
- Flow of fluids - energy and moentum relationships
- Friction in pipes and channels
- Flow of compressible fluids nad two-phase flow
- Flow and pressure measurement
- Heat transfer
- Mass transfer
- The boundary layer an pipe flow
- Momentum, heat and mass transfer
- Humidification and water coolingExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 038435 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038438 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038436 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 020135 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place 038437 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Chemical engineering, Vol. 2. Unit operation / John Metcalfe Coulson
Titre de série : Chemical engineering, Vol. 2 Titre : Unit operation Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur Mention d'édition : 3 éd Editeur : Oxford : Pergamon press Année de publication : 1978 Importance : XXIII-814 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-08-022919-5 Note générale : Index. Langues : Anglais (eng) Mots-clés : Génie chimique
Ecoulement des fluidesIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
This volume, there is an account of the basic theory underlying the various unit operation, and typical items of equipment are described, the equipment items are the essential components of a complete chemical plant, and the way in which such a plant is designed is the subject of volume 6 of the series which has just appeared. The new volume includes material on flowsheeting, heat and material balances, piping, mechanical construction and costing. It completes the series and froms an introduction to the very broad subject of chemical engineering design.Note de contenu : Au sommaire :
- Particulate solids
- Size reduction of solids
- Motion of praticles in a fluid
- Flow of fluids through granular beds and packed
- Sedimentation
- Fluidisation
- Pneumatic and hydraulic conveying
- Gas cleaning
- Filtration
- Distillation
- Absorption of gases
- Liquid-liquid systemsChemical engineering, Vol. 2. Unit operation [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur . - 3 éd . - Oxford : Pergamon press, 1978 . - XXIII-814 p. : ill. ; 25 cm.
ISBN : 978-0-08-022919-5
Index.
Langues : Anglais (eng)
Mots-clés : Génie chimique
Ecoulement des fluidesIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
This volume, there is an account of the basic theory underlying the various unit operation, and typical items of equipment are described, the equipment items are the essential components of a complete chemical plant, and the way in which such a plant is designed is the subject of volume 6 of the series which has just appeared. The new volume includes material on flowsheeting, heat and material balances, piping, mechanical construction and costing. It completes the series and froms an introduction to the very broad subject of chemical engineering design.Note de contenu : Au sommaire :
- Particulate solids
- Size reduction of solids
- Motion of praticles in a fluid
- Flow of fluids through granular beds and packed
- Sedimentation
- Fluidisation
- Pneumatic and hydraulic conveying
- Gas cleaning
- Filtration
- Distillation
- Absorption of gases
- Liquid-liquid systemsExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 038440 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038441 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038442 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 020136 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Chemical engineering, Vol. 2. Particle technology and separation processes / John Metcalfe Coulson
Titre de série : Chemical engineering, Vol. 2 Titre : Particle technology and separation processes Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur Mention d'édition : 5èmme éd. Editeur : Oxford ; Boston : Butterworth-Heinemann Année de publication : 2002 Importance : XXXIII, 1229 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7506-4445-7 Note générale : Bibliogr. en fin de chapitres. Index Langues : Anglais (eng) Mots-clés : Génie chimique
Chimie industrielle
Séparation (technologie)Index. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined.
The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described.
* A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced
* Reflects the growth in complexity and stature of chemical engineering over the last few years
* Supported with further reading at the end of each chapter and graded problems at the end of the bookNote de contenu : Summary :
1. Particulate Solids.
2. Particle size reduction and enlargement.
3. Motion of particles in a fluid.
4. Flow of fluids through granular beds and packed columns.
5. Sedimentation.
6. Fluidisation.
7. Liquid filtration.
8. Membrane separation processes.
9. Centrifugal separations.
10. Leaching.
11. Distillation.
12. Absorption of gases.
13. Liquid-liquid extraction.
14. Evaporation.
15. Crystallisation.
16. Drying.
17. Adsorption.
18. Ion Exchange.
19. Chromatographic separations.
20. Product design and process intensification.Chemical engineering, Vol. 2. Particle technology and separation processes [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur . - 5èmme éd. . - Oxford ; Boston : Butterworth-Heinemann, 2002 . - XXXIII, 1229 p. : ill. ; 25 cm.
ISBN : 978-0-7506-4445-7
Bibliogr. en fin de chapitres. Index
Langues : Anglais (eng)
Mots-clés : Génie chimique
Chimie industrielle
Séparation (technologie)Index. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined.
The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described.
* A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced
* Reflects the growth in complexity and stature of chemical engineering over the last few years
* Supported with further reading at the end of each chapter and graded problems at the end of the bookNote de contenu : Summary :
1. Particulate Solids.
2. Particle size reduction and enlargement.
3. Motion of particles in a fluid.
4. Flow of fluids through granular beds and packed columns.
5. Sedimentation.
6. Fluidisation.
7. Liquid filtration.
8. Membrane separation processes.
9. Centrifugal separations.
10. Leaching.
11. Distillation.
12. Absorption of gases.
13. Liquid-liquid extraction.
14. Evaporation.
15. Crystallisation.
16. Drying.
17. Adsorption.
18. Ion Exchange.
19. Chromatographic separations.
20. Product design and process intensification.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 053266 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place Chemical engineering, Vol. 3. Chemical reactor design, biochemical reaction engineering including computional techniques and control / John Metcalfe Coulson
Titre de série : Chemical engineering, Vol. 3 Titre : Chemical reactor design, biochemical reaction engineering including computional techniques and control Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Acteur ; Donald George Peacock, Editeur scientifique Mention d'édition : 2 éd Editeur : Oxford : Pergamon press Année de publication : 1979 Importance : XVI-648 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 0-08-023819-x Note générale : Index Langues : Anglais (eng) Mots-clés : Réaction chimique.
Génie chimiqueIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
Part from general updating and correction, the main alterations in the second edition of vol.3 are additions to chapter 1 on reactor design and the inclusion of a table of error functions in the appendix.
In chapiter 1 two new sections have been added. In the first of these is a discussion of non-ideal flow conditions in reactors and their effect on residence time distribution and reactor performance. In the second section an important class of chemical reactions-thet in wich a solid and a gas react non-catalytically is treated. Together, these two additions to the chapter considerably increase the value of the book in this area.Note de contenu : Au sommaire :
- Reactor design - general principles
- The design of catalytic reactors
- Process control
- Computers and methods for computation
- Biochemical reaction engineering
- Sorption processesChemical engineering, Vol. 3. Chemical reactor design, biochemical reaction engineering including computional techniques and control [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Acteur ; Donald George Peacock, Editeur scientifique . - 2 éd . - Oxford : Pergamon press, 1979 . - XVI-648 p. : ill. ; 25 cm.
ISSN : 0-08-023819-x
Index
Langues : Anglais (eng)
Mots-clés : Réaction chimique.
Génie chimiqueIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
Part from general updating and correction, the main alterations in the second edition of vol.3 are additions to chapter 1 on reactor design and the inclusion of a table of error functions in the appendix.
In chapiter 1 two new sections have been added. In the first of these is a discussion of non-ideal flow conditions in reactors and their effect on residence time distribution and reactor performance. In the second section an important class of chemical reactions-thet in wich a solid and a gas react non-catalytically is treated. Together, these two additions to the chapter considerably increase the value of the book in this area.Note de contenu : Au sommaire :
- Reactor design - general principles
- The design of catalytic reactors
- Process control
- Computers and methods for computation
- Biochemical reaction engineering
- Sorption processesExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 020137 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038443 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038444 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038446 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Chemical engineering, Vol. 4. Solutions to the problems in chemical engineering. Volume 1 / John Metcalfe Coulson ; John Francis Richardson
Titre de série : Chemical engineering, Vol. 4 Titre : Solutions to the problems in chemical engineering. Volume 1 Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur Editeur : Oxford : Pergamon press Année de publication : 1977 Importance : VII-207 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-0-08-020918-0 Langues : Anglais (eng) Mots-clés : Fluides, Mécanique des
Transfert de masse
Thermocinétique
Génie chimiqueIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
It is desirable for a student to understand a worked example before tackling fresh practical problems himself. Chemical engineering problems require a numerical answer, and it is essential to become familiar with the different techniques so that answers are obtained by systematic methods rather than by intuition.
withe these aims in mind these two volumes have been prepared which contain the solutions to the problems presented inthe third editions of volumes 1 and 2 respectively of chemical engineering. The scope of the books is similar to that of volumes 1 and 2, and the solutions are grouped in sections corresponding to the chapters in those texts. The books have been written concurrently with the preparation of the third edition of volumes 1 and 2, and sources of date in those volumes at all stages . In this sense volume 4 is thus complementary to volume 1 and volume 5 to volume 2Note de contenu : Au sommaire :
1. Units and dimensions.
2. Energy and momentum relationships.
3. Friction in Pipes and channels.
4. Compressible flow.
5. Flow measurement.
6. Pumping of fluids.
7. Heat transfer.
8. Mass transfer.
9. The boundary layer.
10. Heat, amss and momentum transfer.
11. Humidification and water cooling.Chemical engineering, Vol. 4. Solutions to the problems in chemical engineering. Volume 1 [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur . - Oxford : Pergamon press, 1977 . - VII-207 p. : ill. ; 24 cm.
ISBN : 978-0-08-020918-0
Langues : Anglais (eng)
Mots-clés : Fluides, Mécanique des
Transfert de masse
Thermocinétique
Génie chimiqueIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
It is desirable for a student to understand a worked example before tackling fresh practical problems himself. Chemical engineering problems require a numerical answer, and it is essential to become familiar with the different techniques so that answers are obtained by systematic methods rather than by intuition.
withe these aims in mind these two volumes have been prepared which contain the solutions to the problems presented inthe third editions of volumes 1 and 2 respectively of chemical engineering. The scope of the books is similar to that of volumes 1 and 2, and the solutions are grouped in sections corresponding to the chapters in those texts. The books have been written concurrently with the preparation of the third edition of volumes 1 and 2, and sources of date in those volumes at all stages . In this sense volume 4 is thus complementary to volume 1 and volume 5 to volume 2Note de contenu : Au sommaire :
1. Units and dimensions.
2. Energy and momentum relationships.
3. Friction in Pipes and channels.
4. Compressible flow.
5. Flow measurement.
6. Pumping of fluids.
7. Heat transfer.
8. Mass transfer.
9. The boundary layer.
10. Heat, amss and momentum transfer.
11. Humidification and water cooling.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 020133 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place 038450 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible 038449 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible 038447 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Chemical engineering, Vol. 5. Solutions to the problems in chemical engineering. Volume 2 / John Metcalfe Coulson ; John Francis Richardson ; John Rayner Backhurst ; John Hadlett Harker
Titre de série : Chemical engineering, Vol. 5 Titre : Solutions to the problems in chemical engineering. Volume 2 Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur Editeur : Oxford : Pergamon press Année de publication : 1979 Importance : VII-255 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-0-08-022952-2 Langues : Anglais (eng) Mots-clés : Génie chimique
Chemical engineeringIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Note de contenu : Au sommaire :
1. Particulate solids
2. Size reduction of solids.
3. Motion of particles in a fluid.
4. Flow of fluids through granular beds and packed columns.
5. Sedimentation.
6. Fluidisation.
7. Pnueumatic and hydraulic conveying.
8. Gas cleaning.
9. Filtration.
10. Leaching.
11. Distillation.
12. Absorption of gases.
13. Liquid-Liquid systems.
14. Evaporation
15. Crystallisation.
16. Drying.Chemical engineering, Vol. 5. Solutions to the problems in chemical engineering. Volume 2 [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur . - Oxford : Pergamon press, 1979 . - VII-255 p. : ill. ; 24 cm.
ISBN : 978-0-08-022952-2
Langues : Anglais (eng)
Mots-clés : Génie chimique
Chemical engineeringIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Note de contenu : Au sommaire :
1. Particulate solids
2. Size reduction of solids.
3. Motion of particles in a fluid.
4. Flow of fluids through granular beds and packed columns.
5. Sedimentation.
6. Fluidisation.
7. Pnueumatic and hydraulic conveying.
8. Gas cleaning.
9. Filtration.
10. Leaching.
11. Distillation.
12. Absorption of gases.
13. Liquid-Liquid systems.
14. Evaporation
15. Crystallisation.
16. Drying.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 020134 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place 037515 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 037518 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 037517 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Chemical engineering, Vol. 6. Chemical engineering design / R.K. Sinnott
Titre de série : Chemical engineering, Vol. 6 Titre : Chemical engineering design Type de document : texte imprimé Auteurs : R.K. Sinnott, Auteur Mention d'édition : 4th ed Editeur : Amsterdam : Elsevier Année de publication : 2005 Collection : Coulson and Richardson's Chemical Engineering Series Importance : 1038 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7506-6538-4 Note générale : Bibliogr. en fin de chapitres. Index Langues : Anglais (eng) Mots-clés : Génie chimique
Chemical engineeringIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
Chemical Engineering Design is one of the best-known and widely adopted texts available for students of chemical engineering. It deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, the fourth edition covers the latest aspects of process design, operations, safety, loss prevention and equipment selection, among others. Comprehensive and detailed, the book is supported by problems and selected solutions. In addition the book is widely used by professionals as a day-to-day reference.Note de contenu :
* Fundamentals of material balances.
* Fundamentals of energy balances (and energy utilisation).
* Flow-sheeting.
* Piping and instrumentation.
* Costing and project evaluation.
* Materials of construction.
* Design information and data.
* Safety and loss prevention.Chemical engineering, Vol. 6. Chemical engineering design [texte imprimé] / R.K. Sinnott, Auteur . - 4th ed . - Elsevier, 2005 . - 1038 p. : ill. ; 25 cm. - (Coulson and Richardson's Chemical Engineering Series) .
ISBN : 978-0-7506-6538-4
Bibliogr. en fin de chapitres. Index
Langues : Anglais (eng)
Mots-clés : Génie chimique
Chemical engineeringIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
Chemical Engineering Design is one of the best-known and widely adopted texts available for students of chemical engineering. It deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, the fourth edition covers the latest aspects of process design, operations, safety, loss prevention and equipment selection, among others. Comprehensive and detailed, the book is supported by problems and selected solutions. In addition the book is widely used by professionals as a day-to-day reference.Note de contenu :
* Fundamentals of material balances.
* Fundamentals of energy balances (and energy utilisation).
* Flow-sheeting.
* Piping and instrumentation.
* Costing and project evaluation.
* Materials of construction.
* Design information and data.
* Safety and loss prevention.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 049198 66.01 SIN Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 1. Rapport bibliographiques / N. Stoll ; A. Wagner ; L. Goedert
Titre de série : Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 1 Titre : Rapport bibliographiques : EUR 3161. f. Type de document : texte imprimé Auteurs : N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur Editeur : Luxembourg : Aciéries réunies de burbach-eich-dudelange Année de publication : 1966 Autre Editeur : Euratom Importance : 42 p. Format : 29 cm Note générale : Bibliogr. Langues : Français (fre) Mots-clés : Matériaux
Aciers -- analyse
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Les auteurs passent en revue les divers méthodes non nucléaires jusqu'ici utilisées ou en cours de mise au point pour les dosages de l'oxygène, de l'azote et de l'hydrogène dans les aciers. Ils traitement ensuite les réactions nucléaires susceptibles d’être mises à profit pour le dosage de ces 3 éléments en faisant distinction entre des réactions faisant intervenir une irradiation au moyen de particules chargées, de neutrons ou de rayons x. Dans la suite, ils discutent les moyens d'irradiation susceptibles d’être utilisés à l’échelle industrielle pour le dosage des trois éléments susmentionnés, et exposent les méthodes de mesure de l'activité produite, les méthodes de contrôle du flux neutronique et les systèmes de transfert des échantillons. Finalement après avoir passé en revue les méthodes d'étalonnages, ils donnent des indications sur les performances analytiques de la méthode d'analyse par activation neutroniqueNote de contenu : Au sommaire :
- Méthodes non nucléaires
- Dosage de l'azote
- Méthodes nucléaires
- Performances analytiques de la méthode d'analyse par activation neutroniqueEtude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 1. Rapport bibliographiques : EUR 3161. f. [texte imprimé] / N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur . - Luxembourg : Aciéries réunies de burbach-eich-dudelange : [S.l.] : Euratom, 1966 . - 42 p. ; 29 cm.
Bibliogr.
Langues : Français (fre)
Mots-clés : Matériaux
Aciers -- analyse
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Les auteurs passent en revue les divers méthodes non nucléaires jusqu'ici utilisées ou en cours de mise au point pour les dosages de l'oxygène, de l'azote et de l'hydrogène dans les aciers. Ils traitement ensuite les réactions nucléaires susceptibles d’être mises à profit pour le dosage de ces 3 éléments en faisant distinction entre des réactions faisant intervenir une irradiation au moyen de particules chargées, de neutrons ou de rayons x. Dans la suite, ils discutent les moyens d'irradiation susceptibles d’être utilisés à l’échelle industrielle pour le dosage des trois éléments susmentionnés, et exposent les méthodes de mesure de l'activité produite, les méthodes de contrôle du flux neutronique et les systèmes de transfert des échantillons. Finalement après avoir passé en revue les méthodes d'étalonnages, ils donnent des indications sur les performances analytiques de la méthode d'analyse par activation neutroniqueNote de contenu : Au sommaire :
- Méthodes non nucléaires
- Dosage de l'azote
- Méthodes nucléaires
- Performances analytiques de la méthode d'analyse par activation neutroniqueExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 040833 66.017 STO Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 2. Description et résultats des essais / N. Stoll ; A. Wagner ; L. Goedert
Titre de série : Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 2 Titre : Description et résultats des essais : EUR 3161. f. Type de document : texte imprimé Auteurs : N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur Editeur : Luxembourg : Aciéries réunies de burbach-eich-dudelange Année de publication : 1966 Autre Editeur : Euratom Importance : 67 p. Présentation : ill. Format : 30 cm Langues : Français (fre) Mots-clés : Matériaux .
Aciers -- analyse .
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Les auteurs exposent les modalités de prélèvement, d'usinage et de sélection des échantillons d'acier, motivent le choix des méthodes d'analyses e t des laboratoires retenus pour l'étude et décrivent le programme de travail suivi. Dans la suite ils donnent une description des équipements retenues pour le dosage de l'oxygène et indiquent les conditions d'exécution des essais. Le dernier chapitre est réservé à l'exposé de tous les résultats obtenus au cours des essais.Note de contenu : Au sommaire :
- Organisation des essais
- Prélèvement, usinage et sélection des échantillons
- Choix des méthodes et des laboratoires participants
- Programmes de travail
- Description des équipements retenus pour le dosage de l'oxygène et conditions d'exécution des essais
- Résultats des essaisEtude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 2. Description et résultats des essais : EUR 3161. f. [texte imprimé] / N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur . - Luxembourg : Aciéries réunies de burbach-eich-dudelange : [S.l.] : Euratom, 1966 . - 67 p. : ill. ; 30 cm.
Langues : Français (fre)
Mots-clés : Matériaux .
Aciers -- analyse .
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Les auteurs exposent les modalités de prélèvement, d'usinage et de sélection des échantillons d'acier, motivent le choix des méthodes d'analyses e t des laboratoires retenus pour l'étude et décrivent le programme de travail suivi. Dans la suite ils donnent une description des équipements retenues pour le dosage de l'oxygène et indiquent les conditions d'exécution des essais. Le dernier chapitre est réservé à l'exposé de tous les résultats obtenus au cours des essais.Note de contenu : Au sommaire :
- Organisation des essais
- Prélèvement, usinage et sélection des échantillons
- Choix des méthodes et des laboratoires participants
- Programmes de travail
- Description des équipements retenus pour le dosage de l'oxygène et conditions d'exécution des essais
- Résultats des essaisExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 040834 66.017 STO Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 3. Discussion des essais et convlusins a tirer de l'étude / N. Stoll ; A. Wagner ; L. Goedert
Titre de série : Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 3 Titre : Discussion des essais et convlusins a tirer de l'étude : EUR 3161. f. Type de document : texte imprimé Auteurs : N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur Editeur : Luxembourg : Aciéries réunies de burbach-eich-dudelange Année de publication : 1966 Autre Editeur : Euratom Importance : 26 p. Format : 30 cm Langues : Français (fre) Mots-clés : Matériaux
Aciers -- analyse
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Après un bref rappel du contenu des 2 premières parties du rapport les auteurs discutent les résultats analytiques obtenus et exposent les avantages et désavantages des équipements d'activation neutronique et conventionnels mis à l'épreuve. Ils indiquent les frais d'installation pour divers équipements d'activation neutronique et calculent le prix de revient d'un dosage d'oxygène par activation neutronique et par voie conventionnelle en fonction du nombre de dosages effectués. Les auteurs arrivent à conclure qu'au stade actuel de la technique l'analyse par activation neutronique est la seule méthode capable de fournir la teneur en oxygène des aciers en cours d'élaboration avec la rapidité et la précision nécessaires pour permettre aux aciéristes de doser en fonction de cette teneur les moyens de désoxydation à mettre doser en fonction de cette teneur les moyens de désoxydation à mette en œuvreNote de contenu : Au sommaire :
- Discussion des essais
- Résultats analytiques
- Remarques relatives aux teneurs moyennes dosées suivant les différentes méthodes en compétition
- Apparaeils utilisés
- Equipements d'activation neutronique
- Frais d'installation des équipements d'activation neutronique
- Prix de revient des dosages ...Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 3. Discussion des essais et convlusins a tirer de l'étude : EUR 3161. f. [texte imprimé] / N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur . - Luxembourg : Aciéries réunies de burbach-eich-dudelange : [S.l.] : Euratom, 1966 . - 26 p. ; 30 cm.
Langues : Français (fre)
Mots-clés : Matériaux
Aciers -- analyse
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Après un bref rappel du contenu des 2 premières parties du rapport les auteurs discutent les résultats analytiques obtenus et exposent les avantages et désavantages des équipements d'activation neutronique et conventionnels mis à l'épreuve. Ils indiquent les frais d'installation pour divers équipements d'activation neutronique et calculent le prix de revient d'un dosage d'oxygène par activation neutronique et par voie conventionnelle en fonction du nombre de dosages effectués. Les auteurs arrivent à conclure qu'au stade actuel de la technique l'analyse par activation neutronique est la seule méthode capable de fournir la teneur en oxygène des aciers en cours d'élaboration avec la rapidité et la précision nécessaires pour permettre aux aciéristes de doser en fonction de cette teneur les moyens de désoxydation à mettre doser en fonction de cette teneur les moyens de désoxydation à mette en œuvreNote de contenu : Au sommaire :
- Discussion des essais
- Résultats analytiques
- Remarques relatives aux teneurs moyennes dosées suivant les différentes méthodes en compétition
- Apparaeils utilisés
- Equipements d'activation neutronique
- Frais d'installation des équipements d'activation neutronique
- Prix de revient des dosages ...Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 040835 66.017 STO Papier Bibliothèque Centrale Génie Chimique Disponible En bon état