Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner à l'écran de résultat de la dernière recherche | Consulter l'historique des recherches | Retourner au premier écran avec les recherches... |
. Bibliothèque Centrale
Génie Chimique > Ingénierie chimique en général
Chemical engineering, Vol. 1. Fluid flow, heat transfer and mass transfer / John Metcalfe Coulson
Titre de série : Chemical engineering, Vol. 1 Titre : Fluid flow, heat transfer and mass transfer Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Editeur scientifique ; John Hadlett Harker, Editeur scientifique Mention d'édition : 3 éd Editeur : Oxford : Pergamon press Année de publication : 1977 Importance : xvii-449 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-08-021015-5 Langues : Anglais (eng) Mots-clés : Génie chimique
Thermocinétique
Transfert de masse
Fluides, Mécanique desIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
It is the purpose of the present work to present to the student an account of the fundamentals operations froms a major feature of chemical engineering technology. This volum is divided into four sections, fluid flow, heat transfer, mass transfer and humidification. Since the chemical engineer must handle fluids of all kinds, including compressible gases at high pressures, we belive that it is a good plan to consider the problem from a thermodynamic aspect and to derive general equations for which can be used in a wide range of circumstances.Note de contenu : Au sommaire :
- Units and dimensions
- Flow of fluids - energy and moentum relationships
- Friction in pipes and channels
- Flow of compressible fluids nad two-phase flow
- Flow and pressure measurement
- Heat transfer
- Mass transfer
- The boundary layer an pipe flow
- Momentum, heat and mass transfer
- Humidification and water coolingChemical engineering, Vol. 1. Fluid flow, heat transfer and mass transfer [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Editeur scientifique ; John Hadlett Harker, Editeur scientifique . - 3 éd . - Oxford : Pergamon press, 1977 . - xvii-449 p. : ill. ; 25 cm.
ISBN : 978-0-08-021015-5
Langues : Anglais (eng)
Mots-clés : Génie chimique
Thermocinétique
Transfert de masse
Fluides, Mécanique desIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
It is the purpose of the present work to present to the student an account of the fundamentals operations froms a major feature of chemical engineering technology. This volum is divided into four sections, fluid flow, heat transfer, mass transfer and humidification. Since the chemical engineer must handle fluids of all kinds, including compressible gases at high pressures, we belive that it is a good plan to consider the problem from a thermodynamic aspect and to derive general equations for which can be used in a wide range of circumstances.Note de contenu : Au sommaire :
- Units and dimensions
- Flow of fluids - energy and moentum relationships
- Friction in pipes and channels
- Flow of compressible fluids nad two-phase flow
- Flow and pressure measurement
- Heat transfer
- Mass transfer
- The boundary layer an pipe flow
- Momentum, heat and mass transfer
- Humidification and water coolingExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 038435 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038438 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038436 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 020135 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place 038437 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Chemical engineering, Vol. 2. Unit operation / John Metcalfe Coulson
Titre de série : Chemical engineering, Vol. 2 Titre : Unit operation Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur Mention d'édition : 3 éd Editeur : Oxford : Pergamon press Année de publication : 1978 Importance : XXIII-814 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-08-022919-5 Note générale : Index. Langues : Anglais (eng) Mots-clés : Génie chimique
Ecoulement des fluidesIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
This volume, there is an account of the basic theory underlying the various unit operation, and typical items of equipment are described, the equipment items are the essential components of a complete chemical plant, and the way in which such a plant is designed is the subject of volume 6 of the series which has just appeared. The new volume includes material on flowsheeting, heat and material balances, piping, mechanical construction and costing. It completes the series and froms an introduction to the very broad subject of chemical engineering design.Note de contenu : Au sommaire :
- Particulate solids
- Size reduction of solids
- Motion of praticles in a fluid
- Flow of fluids through granular beds and packed
- Sedimentation
- Fluidisation
- Pneumatic and hydraulic conveying
- Gas cleaning
- Filtration
- Distillation
- Absorption of gases
- Liquid-liquid systemsChemical engineering, Vol. 2. Unit operation [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur . - 3 éd . - Oxford : Pergamon press, 1978 . - XXIII-814 p. : ill. ; 25 cm.
ISBN : 978-0-08-022919-5
Index.
Langues : Anglais (eng)
Mots-clés : Génie chimique
Ecoulement des fluidesIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
This volume, there is an account of the basic theory underlying the various unit operation, and typical items of equipment are described, the equipment items are the essential components of a complete chemical plant, and the way in which such a plant is designed is the subject of volume 6 of the series which has just appeared. The new volume includes material on flowsheeting, heat and material balances, piping, mechanical construction and costing. It completes the series and froms an introduction to the very broad subject of chemical engineering design.Note de contenu : Au sommaire :
- Particulate solids
- Size reduction of solids
- Motion of praticles in a fluid
- Flow of fluids through granular beds and packed
- Sedimentation
- Fluidisation
- Pneumatic and hydraulic conveying
- Gas cleaning
- Filtration
- Distillation
- Absorption of gases
- Liquid-liquid systemsExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 038440 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038441 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038442 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 020136 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Chemical engineering, Vol. 2. Particle technology and separation processes / John Metcalfe Coulson
Titre de série : Chemical engineering, Vol. 2 Titre : Particle technology and separation processes Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur Mention d'édition : 5èmme éd. Editeur : Oxford ; Boston : Butterworth-Heinemann Année de publication : 2002 Importance : XXXIII, 1229 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7506-4445-7 Note générale : Bibliogr. en fin de chapitres. Index Langues : Anglais (eng) Mots-clés : Génie chimique
Chimie industrielle
Séparation (technologie)Index. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined.
The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described.
* A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced
* Reflects the growth in complexity and stature of chemical engineering over the last few years
* Supported with further reading at the end of each chapter and graded problems at the end of the bookNote de contenu : Summary :
1. Particulate Solids.
2. Particle size reduction and enlargement.
3. Motion of particles in a fluid.
4. Flow of fluids through granular beds and packed columns.
5. Sedimentation.
6. Fluidisation.
7. Liquid filtration.
8. Membrane separation processes.
9. Centrifugal separations.
10. Leaching.
11. Distillation.
12. Absorption of gases.
13. Liquid-liquid extraction.
14. Evaporation.
15. Crystallisation.
16. Drying.
17. Adsorption.
18. Ion Exchange.
19. Chromatographic separations.
20. Product design and process intensification.Chemical engineering, Vol. 2. Particle technology and separation processes [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur . - 5èmme éd. . - Oxford ; Boston : Butterworth-Heinemann, 2002 . - XXXIII, 1229 p. : ill. ; 25 cm.
ISBN : 978-0-7506-4445-7
Bibliogr. en fin de chapitres. Index
Langues : Anglais (eng)
Mots-clés : Génie chimique
Chimie industrielle
Séparation (technologie)Index. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé : Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined.
The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described.
* A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced
* Reflects the growth in complexity and stature of chemical engineering over the last few years
* Supported with further reading at the end of each chapter and graded problems at the end of the bookNote de contenu : Summary :
1. Particulate Solids.
2. Particle size reduction and enlargement.
3. Motion of particles in a fluid.
4. Flow of fluids through granular beds and packed columns.
5. Sedimentation.
6. Fluidisation.
7. Liquid filtration.
8. Membrane separation processes.
9. Centrifugal separations.
10. Leaching.
11. Distillation.
12. Absorption of gases.
13. Liquid-liquid extraction.
14. Evaporation.
15. Crystallisation.
16. Drying.
17. Adsorption.
18. Ion Exchange.
19. Chromatographic separations.
20. Product design and process intensification.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 053266 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place Chemical engineering, Vol. 3. Chemical reactor design, biochemical reaction engineering including computional techniques and control / John Metcalfe Coulson
Titre de série : Chemical engineering, Vol. 3 Titre : Chemical reactor design, biochemical reaction engineering including computional techniques and control Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Acteur ; Donald George Peacock, Editeur scientifique Mention d'édition : 2 éd Editeur : Oxford : Pergamon press Année de publication : 1979 Importance : XVI-648 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 0-08-023819-x Note générale : Index Langues : Anglais (eng) Mots-clés : Réaction chimique.
Génie chimiqueIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
Part from general updating and correction, the main alterations in the second edition of vol.3 are additions to chapter 1 on reactor design and the inclusion of a table of error functions in the appendix.
In chapiter 1 two new sections have been added. In the first of these is a discussion of non-ideal flow conditions in reactors and their effect on residence time distribution and reactor performance. In the second section an important class of chemical reactions-thet in wich a solid and a gas react non-catalytically is treated. Together, these two additions to the chapter considerably increase the value of the book in this area.Note de contenu : Au sommaire :
- Reactor design - general principles
- The design of catalytic reactors
- Process control
- Computers and methods for computation
- Biochemical reaction engineering
- Sorption processesChemical engineering, Vol. 3. Chemical reactor design, biochemical reaction engineering including computional techniques and control [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Acteur ; Donald George Peacock, Editeur scientifique . - 2 éd . - Oxford : Pergamon press, 1979 . - XVI-648 p. : ill. ; 25 cm.
ISSN : 0-08-023819-x
Index
Langues : Anglais (eng)
Mots-clés : Réaction chimique.
Génie chimiqueIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
Part from general updating and correction, the main alterations in the second edition of vol.3 are additions to chapter 1 on reactor design and the inclusion of a table of error functions in the appendix.
In chapiter 1 two new sections have been added. In the first of these is a discussion of non-ideal flow conditions in reactors and their effect on residence time distribution and reactor performance. In the second section an important class of chemical reactions-thet in wich a solid and a gas react non-catalytically is treated. Together, these two additions to the chapter considerably increase the value of the book in this area.Note de contenu : Au sommaire :
- Reactor design - general principles
- The design of catalytic reactors
- Process control
- Computers and methods for computation
- Biochemical reaction engineering
- Sorption processesExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 020137 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038443 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038444 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 038446 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Chemical engineering, Vol. 4. Solutions to the problems in chemical engineering. Volume 1 / John Metcalfe Coulson ; John Francis Richardson
Titre de série : Chemical engineering, Vol. 4 Titre : Solutions to the problems in chemical engineering. Volume 1 Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur Editeur : Oxford : Pergamon press Année de publication : 1977 Importance : VII-207 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-0-08-020918-0 Langues : Anglais (eng) Mots-clés : Fluides, Mécanique des
Transfert de masse
Thermocinétique
Génie chimiqueIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
It is desirable for a student to understand a worked example before tackling fresh practical problems himself. Chemical engineering problems require a numerical answer, and it is essential to become familiar with the different techniques so that answers are obtained by systematic methods rather than by intuition.
withe these aims in mind these two volumes have been prepared which contain the solutions to the problems presented inthe third editions of volumes 1 and 2 respectively of chemical engineering. The scope of the books is similar to that of volumes 1 and 2, and the solutions are grouped in sections corresponding to the chapters in those texts. The books have been written concurrently with the preparation of the third edition of volumes 1 and 2, and sources of date in those volumes at all stages . In this sense volume 4 is thus complementary to volume 1 and volume 5 to volume 2Note de contenu : Au sommaire :
1. Units and dimensions.
2. Energy and momentum relationships.
3. Friction in Pipes and channels.
4. Compressible flow.
5. Flow measurement.
6. Pumping of fluids.
7. Heat transfer.
8. Mass transfer.
9. The boundary layer.
10. Heat, amss and momentum transfer.
11. Humidification and water cooling.Chemical engineering, Vol. 4. Solutions to the problems in chemical engineering. Volume 1 [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur . - Oxford : Pergamon press, 1977 . - VII-207 p. : ill. ; 24 cm.
ISBN : 978-0-08-020918-0
Langues : Anglais (eng)
Mots-clés : Fluides, Mécanique des
Transfert de masse
Thermocinétique
Génie chimiqueIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
It is desirable for a student to understand a worked example before tackling fresh practical problems himself. Chemical engineering problems require a numerical answer, and it is essential to become familiar with the different techniques so that answers are obtained by systematic methods rather than by intuition.
withe these aims in mind these two volumes have been prepared which contain the solutions to the problems presented inthe third editions of volumes 1 and 2 respectively of chemical engineering. The scope of the books is similar to that of volumes 1 and 2, and the solutions are grouped in sections corresponding to the chapters in those texts. The books have been written concurrently with the preparation of the third edition of volumes 1 and 2, and sources of date in those volumes at all stages . In this sense volume 4 is thus complementary to volume 1 and volume 5 to volume 2Note de contenu : Au sommaire :
1. Units and dimensions.
2. Energy and momentum relationships.
3. Friction in Pipes and channels.
4. Compressible flow.
5. Flow measurement.
6. Pumping of fluids.
7. Heat transfer.
8. Mass transfer.
9. The boundary layer.
10. Heat, amss and momentum transfer.
11. Humidification and water cooling.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 020133 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place 038450 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible 038449 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible 038447 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Chemical engineering, Vol. 5. Solutions to the problems in chemical engineering. Volume 2 / John Metcalfe Coulson ; John Francis Richardson ; John Rayner Backhurst ; John Hadlett Harker
Titre de série : Chemical engineering, Vol. 5 Titre : Solutions to the problems in chemical engineering. Volume 2 Type de document : texte imprimé Auteurs : John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur Editeur : Oxford : Pergamon press Année de publication : 1979 Importance : VII-255 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-0-08-022952-2 Langues : Anglais (eng) Mots-clés : Génie chimique
Chemical engineeringIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Note de contenu : Au sommaire :
1. Particulate solids
2. Size reduction of solids.
3. Motion of particles in a fluid.
4. Flow of fluids through granular beds and packed columns.
5. Sedimentation.
6. Fluidisation.
7. Pnueumatic and hydraulic conveying.
8. Gas cleaning.
9. Filtration.
10. Leaching.
11. Distillation.
12. Absorption of gases.
13. Liquid-Liquid systems.
14. Evaporation
15. Crystallisation.
16. Drying.Chemical engineering, Vol. 5. Solutions to the problems in chemical engineering. Volume 2 [texte imprimé] / John Metcalfe Coulson, Auteur ; John Francis Richardson, Auteur ; John Rayner Backhurst, Collaborateur ; John Hadlett Harker, Collaborateur . - Oxford : Pergamon press, 1979 . - VII-255 p. : ill. ; 24 cm.
ISBN : 978-0-08-022952-2
Langues : Anglais (eng)
Mots-clés : Génie chimique
Chemical engineeringIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Note de contenu : Au sommaire :
1. Particulate solids
2. Size reduction of solids.
3. Motion of particles in a fluid.
4. Flow of fluids through granular beds and packed columns.
5. Sedimentation.
6. Fluidisation.
7. Pnueumatic and hydraulic conveying.
8. Gas cleaning.
9. Filtration.
10. Leaching.
11. Distillation.
12. Absorption of gases.
13. Liquid-Liquid systems.
14. Evaporation
15. Crystallisation.
16. Drying.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 020134 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place 037515 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 037518 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état 037517 66.01 COU Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Chemical engineering, Vol. 6. Chemical engineering design / R.K. Sinnott
Titre de série : Chemical engineering, Vol. 6 Titre : Chemical engineering design Type de document : texte imprimé Auteurs : R.K. Sinnott, Auteur Mention d'édition : 4th ed Editeur : Amsterdam : Elsevier Année de publication : 2005 Collection : Coulson and Richardson's Chemical Engineering Series Importance : 1038 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7506-6538-4 Note générale : Bibliogr. en fin de chapitres. Index Langues : Anglais (eng) Mots-clés : Génie chimique
Chemical engineeringIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
Chemical Engineering Design is one of the best-known and widely adopted texts available for students of chemical engineering. It deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, the fourth edition covers the latest aspects of process design, operations, safety, loss prevention and equipment selection, among others. Comprehensive and detailed, the book is supported by problems and selected solutions. In addition the book is widely used by professionals as a day-to-day reference.Note de contenu :
* Fundamentals of material balances.
* Fundamentals of energy balances (and energy utilisation).
* Flow-sheeting.
* Piping and instrumentation.
* Costing and project evaluation.
* Materials of construction.
* Design information and data.
* Safety and loss prevention.Chemical engineering, Vol. 6. Chemical engineering design [texte imprimé] / R.K. Sinnott, Auteur . - 4th ed . - Elsevier, 2005 . - 1038 p. : ill. ; 25 cm. - (Coulson and Richardson's Chemical Engineering Series) .
ISBN : 978-0-7506-6538-4
Bibliogr. en fin de chapitres. Index
Langues : Anglais (eng)
Mots-clés : Génie chimique
Chemical engineeringIndex. décimale : 66.01 Travail et méthodes de l'ingénieur-chimiste Résumé :
Chemical Engineering Design is one of the best-known and widely adopted texts available for students of chemical engineering. It deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, the fourth edition covers the latest aspects of process design, operations, safety, loss prevention and equipment selection, among others. Comprehensive and detailed, the book is supported by problems and selected solutions. In addition the book is widely used by professionals as a day-to-day reference.Note de contenu :
* Fundamentals of material balances.
* Fundamentals of energy balances (and energy utilisation).
* Flow-sheeting.
* Piping and instrumentation.
* Costing and project evaluation.
* Materials of construction.
* Design information and data.
* Safety and loss prevention.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 049198 66.01 SIN Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Chemical technology, Part 1. The theoretical foundations of chemical technology / I. Mukhlyonov
Titre de série : Chemical technology, Part 1 Titre : The theoretical foundations of chemical technology Type de document : texte imprimé Auteurs : I. Mukhlyonov, Auteur ; A. Averbukh, Auteur ; E. Tumarkina, Auteur ; I. Furmer, Auteur ; George Koval, Traducteur Editeur : Moscou : Éditions Mir Année de publication : 1979 Importance : 324 p. Format : 22 cm Note générale : Bibliogr. p. [321]. Index p. 322-324 Langues : Anglais (eng) Langues originales : Russe (rus) Mots-clés : Génie chimique -- Réacteur ; Chimie industrielle Index. décimale : 66.0 Ingénierie chimique en général Résumé :
The this first part contains generalization and description of the theoretical foundation of chemical engineering applicable to homogeneous, heterogeneous and catalytic processes.
Special attention has been paid in this volum to a study of macrokinetics of chemical processes and theory of chemical reactors. New material, formulae and tables necessary for calculations of chemical processes and reactors, and basic information about raw materials have been includedNote de contenu : Au sommaire :
- Importance of the chemical industry, its development and grawth
- Basic principales of chemical technology
- Chemical reactors
- Homogeneous processes and reactors
- Herterogenous non-catalytic processes and reactors
- Catalytic processes and apparatus
- Raw materials and energy for the chemical industryChemical technology, Part 1. The theoretical foundations of chemical technology [texte imprimé] / I. Mukhlyonov, Auteur ; A. Averbukh, Auteur ; E. Tumarkina, Auteur ; I. Furmer, Auteur ; George Koval, Traducteur . - Moscou : Éditions Mir, 1979 . - 324 p. ; 22 cm.
Bibliogr. p. [321]. Index p. 322-324
Langues : Anglais (eng) Langues originales : Russe (rus)
Mots-clés : Génie chimique -- Réacteur ; Chimie industrielle Index. décimale : 66.0 Ingénierie chimique en général Résumé :
The this first part contains generalization and description of the theoretical foundation of chemical engineering applicable to homogeneous, heterogeneous and catalytic processes.
Special attention has been paid in this volum to a study of macrokinetics of chemical processes and theory of chemical reactors. New material, formulae and tables necessary for calculations of chemical processes and reactors, and basic information about raw materials have been includedNote de contenu : Au sommaire :
- Importance of the chemical industry, its development and grawth
- Basic principales of chemical technology
- Chemical reactors
- Homogeneous processes and reactors
- Herterogenous non-catalytic processes and reactors
- Catalytic processes and apparatus
- Raw materials and energy for the chemical industryExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 036615 66.0 CHE Papier Bibliothèque Centrale Génie Chimique Disponible 036616 66.0 CHE Papier Bibliothèque Centrale Génie Chimique Disponible 036617 66.0 CHE Papier Bibliothèque Centrale Génie Chimique Disponible 036618 66.0 CHE Papier Bibliothèque Centrale Génie Chimique Disponible Chemical technology, Part 2. The moste important industriel / I. Mukhlyonov
Titre de série : Chemical technology, Part 2 Titre : The moste important industriel : chemical processes Type de document : texte imprimé Auteurs : I. Mukhlyonov, Auteur ; A. Averbukh, Auteur ; D. Kuznetsov, Auteur ; A. Amelin, Auteur ; George Koval, Traducteur Editeur : Moscou : Éditions Mir Année de publication : 1979 Importance : 232 p. Format : 22 cm Note générale : Bibliogr. p. [318]. Index p. 319-323 Langues : Anglais (eng) Langues originales : Russe (rus) Mots-clés : Génie chimique ; Chimie industrielle ; Métallurgie Index. décimale : 66.0 Ingénierie chimique en général Résumé :
The second part deals with the application of basic laws for chemical engineering processes of utmost national economic importance. It cites as examples the processes acide, ammonia, nitric acid, mineral salts and fertilizers, silicates, metallurgical and electrochemical products, as welle as processes for rendering industrial waste harmless.Note de contenu : Au sommaire :
- The manufacture of sulphurie acid
- Ammonia synthesis
- The manufactur of nitric acid
- The manufacture of inorganic salts and fertilizers
- Silicate technology
- Metallurgy
- Electrochemical manufacturing processes
- The chemical technologu of fuel
- Industrial organie synthesis
- High-mplecular compounds
- Industrial-wastes purficationChemical technology, Part 2. The moste important industriel : chemical processes [texte imprimé] / I. Mukhlyonov, Auteur ; A. Averbukh, Auteur ; D. Kuznetsov, Auteur ; A. Amelin, Auteur ; George Koval, Traducteur . - Moscou : Éditions Mir, 1979 . - 232 p. ; 22 cm.
Bibliogr. p. [318]. Index p. 319-323
Langues : Anglais (eng) Langues originales : Russe (rus)
Mots-clés : Génie chimique ; Chimie industrielle ; Métallurgie Index. décimale : 66.0 Ingénierie chimique en général Résumé :
The second part deals with the application of basic laws for chemical engineering processes of utmost national economic importance. It cites as examples the processes acide, ammonia, nitric acid, mineral salts and fertilizers, silicates, metallurgical and electrochemical products, as welle as processes for rendering industrial waste harmless.Note de contenu : Au sommaire :
- The manufacture of sulphurie acid
- Ammonia synthesis
- The manufactur of nitric acid
- The manufacture of inorganic salts and fertilizers
- Silicate technology
- Metallurgy
- Electrochemical manufacturing processes
- The chemical technologu of fuel
- Industrial organie synthesis
- High-mplecular compounds
- Industrial-wastes purficationExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 036611 66.0 CHE Papier Bibliothèque Centrale Génie Chimique Disponible 036612 66.0 CHE Papier Bibliothèque Centrale Génie Chimique Disponible 036613 66.0 CHE Papier Bibliothèque Centrale Génie Chimique Disponible 036614 66.0 CHE Papier Bibliothèque Centrale Génie Chimique Disponible Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 1. Rapport bibliographiques / N. Stoll ; A. Wagner ; L. Goedert
Titre de série : Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 1 Titre : Rapport bibliographiques : EUR 3161. f. Type de document : texte imprimé Auteurs : N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur Editeur : Luxembourg : Aciéries réunies de burbach-eich-dudelange Année de publication : 1966 Autre Editeur : Euratom Importance : 42 p. Format : 29 cm Note générale : Bibliogr. Langues : Français (fre) Mots-clés : Matériaux
Aciers -- analyse
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Les auteurs passent en revue les divers méthodes non nucléaires jusqu'ici utilisées ou en cours de mise au point pour les dosages de l'oxygène, de l'azote et de l'hydrogène dans les aciers. Ils traitement ensuite les réactions nucléaires susceptibles d’être mises à profit pour le dosage de ces 3 éléments en faisant distinction entre des réactions faisant intervenir une irradiation au moyen de particules chargées, de neutrons ou de rayons x. Dans la suite, ils discutent les moyens d'irradiation susceptibles d’être utilisés à l’échelle industrielle pour le dosage des trois éléments susmentionnés, et exposent les méthodes de mesure de l'activité produite, les méthodes de contrôle du flux neutronique et les systèmes de transfert des échantillons. Finalement après avoir passé en revue les méthodes d'étalonnages, ils donnent des indications sur les performances analytiques de la méthode d'analyse par activation neutroniqueNote de contenu : Au sommaire :
- Méthodes non nucléaires
- Dosage de l'azote
- Méthodes nucléaires
- Performances analytiques de la méthode d'analyse par activation neutroniqueEtude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 1. Rapport bibliographiques : EUR 3161. f. [texte imprimé] / N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur . - Luxembourg : Aciéries réunies de burbach-eich-dudelange : [S.l.] : Euratom, 1966 . - 42 p. ; 29 cm.
Bibliogr.
Langues : Français (fre)
Mots-clés : Matériaux
Aciers -- analyse
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Les auteurs passent en revue les divers méthodes non nucléaires jusqu'ici utilisées ou en cours de mise au point pour les dosages de l'oxygène, de l'azote et de l'hydrogène dans les aciers. Ils traitement ensuite les réactions nucléaires susceptibles d’être mises à profit pour le dosage de ces 3 éléments en faisant distinction entre des réactions faisant intervenir une irradiation au moyen de particules chargées, de neutrons ou de rayons x. Dans la suite, ils discutent les moyens d'irradiation susceptibles d’être utilisés à l’échelle industrielle pour le dosage des trois éléments susmentionnés, et exposent les méthodes de mesure de l'activité produite, les méthodes de contrôle du flux neutronique et les systèmes de transfert des échantillons. Finalement après avoir passé en revue les méthodes d'étalonnages, ils donnent des indications sur les performances analytiques de la méthode d'analyse par activation neutroniqueNote de contenu : Au sommaire :
- Méthodes non nucléaires
- Dosage de l'azote
- Méthodes nucléaires
- Performances analytiques de la méthode d'analyse par activation neutroniqueExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 040833 66.017 STO Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 2. Description et résultats des essais / N. Stoll ; A. Wagner ; L. Goedert
Titre de série : Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 2 Titre : Description et résultats des essais : EUR 3161. f. Type de document : texte imprimé Auteurs : N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur Editeur : Luxembourg : Aciéries réunies de burbach-eich-dudelange Année de publication : 1966 Autre Editeur : Euratom Importance : 67 p. Présentation : ill. Format : 30 cm Langues : Français (fre) Mots-clés : Matériaux .
Aciers -- analyse .
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Les auteurs exposent les modalités de prélèvement, d'usinage et de sélection des échantillons d'acier, motivent le choix des méthodes d'analyses e t des laboratoires retenus pour l'étude et décrivent le programme de travail suivi. Dans la suite ils donnent une description des équipements retenues pour le dosage de l'oxygène et indiquent les conditions d'exécution des essais. Le dernier chapitre est réservé à l'exposé de tous les résultats obtenus au cours des essais.Note de contenu : Au sommaire :
- Organisation des essais
- Prélèvement, usinage et sélection des échantillons
- Choix des méthodes et des laboratoires participants
- Programmes de travail
- Description des équipements retenus pour le dosage de l'oxygène et conditions d'exécution des essais
- Résultats des essaisEtude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 2. Description et résultats des essais : EUR 3161. f. [texte imprimé] / N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur . - Luxembourg : Aciéries réunies de burbach-eich-dudelange : [S.l.] : Euratom, 1966 . - 67 p. : ill. ; 30 cm.
Langues : Français (fre)
Mots-clés : Matériaux .
Aciers -- analyse .
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Les auteurs exposent les modalités de prélèvement, d'usinage et de sélection des échantillons d'acier, motivent le choix des méthodes d'analyses e t des laboratoires retenus pour l'étude et décrivent le programme de travail suivi. Dans la suite ils donnent une description des équipements retenues pour le dosage de l'oxygène et indiquent les conditions d'exécution des essais. Le dernier chapitre est réservé à l'exposé de tous les résultats obtenus au cours des essais.Note de contenu : Au sommaire :
- Organisation des essais
- Prélèvement, usinage et sélection des échantillons
- Choix des méthodes et des laboratoires participants
- Programmes de travail
- Description des équipements retenus pour le dosage de l'oxygène et conditions d'exécution des essais
- Résultats des essaisExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 040834 66.017 STO Papier Bibliothèque Centrale Génie Chimique Disponible En bon état Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 3. Discussion des essais et convlusins a tirer de l'étude / N. Stoll ; A. Wagner ; L. Goedert
Titre de série : Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 3 Titre : Discussion des essais et convlusins a tirer de l'étude : EUR 3161. f. Type de document : texte imprimé Auteurs : N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur Editeur : Luxembourg : Aciéries réunies de burbach-eich-dudelange Année de publication : 1966 Autre Editeur : Euratom Importance : 26 p. Format : 30 cm Langues : Français (fre) Mots-clés : Matériaux
Aciers -- analyse
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Après un bref rappel du contenu des 2 premières parties du rapport les auteurs discutent les résultats analytiques obtenus et exposent les avantages et désavantages des équipements d'activation neutronique et conventionnels mis à l'épreuve. Ils indiquent les frais d'installation pour divers équipements d'activation neutronique et calculent le prix de revient d'un dosage d'oxygène par activation neutronique et par voie conventionnelle en fonction du nombre de dosages effectués. Les auteurs arrivent à conclure qu'au stade actuel de la technique l'analyse par activation neutronique est la seule méthode capable de fournir la teneur en oxygène des aciers en cours d'élaboration avec la rapidité et la précision nécessaires pour permettre aux aciéristes de doser en fonction de cette teneur les moyens de désoxydation à mettre doser en fonction de cette teneur les moyens de désoxydation à mette en œuvreNote de contenu : Au sommaire :
- Discussion des essais
- Résultats analytiques
- Remarques relatives aux teneurs moyennes dosées suivant les différentes méthodes en compétition
- Apparaeils utilisés
- Equipements d'activation neutronique
- Frais d'installation des équipements d'activation neutronique
- Prix de revient des dosages ...Etude des possibilites d'utilisation industrielle de l'analyse par activation pour le dosage de l'oxygene et eventuellement de l'azote et de l'hydrogene dans les aciers, Vol. 3. Discussion des essais et convlusins a tirer de l'étude : EUR 3161. f. [texte imprimé] / N. Stoll, Auteur ; A. Wagner, Auteur ; L. Goedert, Auteur . - Luxembourg : Aciéries réunies de burbach-eich-dudelange : [S.l.] : Euratom, 1966 . - 26 p. ; 30 cm.
Langues : Français (fre)
Mots-clés : Matériaux
Aciers -- analyse
Azote .
Hydrogène .
Oxygène .Index. décimale : 66.017 Les matériaux et leurs propriétés Résumé :
Après un bref rappel du contenu des 2 premières parties du rapport les auteurs discutent les résultats analytiques obtenus et exposent les avantages et désavantages des équipements d'activation neutronique et conventionnels mis à l'épreuve. Ils indiquent les frais d'installation pour divers équipements d'activation neutronique et calculent le prix de revient d'un dosage d'oxygène par activation neutronique et par voie conventionnelle en fonction du nombre de dosages effectués. Les auteurs arrivent à conclure qu'au stade actuel de la technique l'analyse par activation neutronique est la seule méthode capable de fournir la teneur en oxygène des aciers en cours d'élaboration avec la rapidité et la précision nécessaires pour permettre aux aciéristes de doser en fonction de cette teneur les moyens de désoxydation à mettre doser en fonction de cette teneur les moyens de désoxydation à mette en œuvreNote de contenu : Au sommaire :
- Discussion des essais
- Résultats analytiques
- Remarques relatives aux teneurs moyennes dosées suivant les différentes méthodes en compétition
- Apparaeils utilisés
- Equipements d'activation neutronique
- Frais d'installation des équipements d'activation neutronique
- Prix de revient des dosages ...Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 040835 66.017 STO Papier Bibliothèque Centrale Génie Chimique Disponible En bon état L'oxydation des métaux. Monographies. Tome 2 / Jean-Yves Benard ; J. Herenguel
Titre de série : L'oxydation des métaux Titre : Monographies. Tome 2 Type de document : texte imprimé Auteurs : Jean-Yves Benard, Editeur scientifique ; J. Herenguel, Editeur scientifique ; Lelong P., Editeur scientifique Editeur : Paris : Gauthier-Villars Année de publication : 1964 Importance : 517 p. Présentation : ill. Format : 24 cm Note générale : Bibliogr. en fin de chapitres. Index Langues : Français (fre) Mots-clés : Métaux -- Oxydation
Metals
OxidationIndex. décimale : 66.094.37 Oxydation catalytique Note de contenu :
Au sommaire:
1. Le fer
2. Les métaux de la famille du fer
3. Les alliages a bas de fer et les aciers inoxydables
4. Les alliages de nickel et de nickle-chrome
5. Les alliages de cobalt
6. Le titane et les alliages de titane
7. Les métaux réfractaires
8. Le molybdène et alliages
9. L'oxydation catastrophique par les oxydes a bas pont de fusion
10. Oxydation du zirconium
...L'oxydation des métaux. Monographies. Tome 2 [texte imprimé] / Jean-Yves Benard, Editeur scientifique ; J. Herenguel, Editeur scientifique ; Lelong P., Editeur scientifique . - Paris : Gauthier-Villars, 1964 . - 517 p. : ill. ; 24 cm.
Bibliogr. en fin de chapitres. Index
Langues : Français (fre)
Mots-clés : Métaux -- Oxydation
Metals
OxidationIndex. décimale : 66.094.37 Oxydation catalytique Note de contenu :
Au sommaire:
1. Le fer
2. Les métaux de la famille du fer
3. Les alliages a bas de fer et les aciers inoxydables
4. Les alliages de nickel et de nickle-chrome
5. Les alliages de cobalt
6. Le titane et les alliages de titane
7. Les métaux réfractaires
8. Le molybdène et alliages
9. L'oxydation catastrophique par les oxydes a bas pont de fusion
10. Oxydation du zirconium
...Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 006881 66.094.37 OXY Papier Bibliothèque Annexe Génie Chimique Disponible Consultation sur place 025415 66.094.37 OXY Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place 025416 66.094.37 OXY Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place 025417 66.094.37 OXY Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place 025418 66.094.37 OXY Papier Bibliothèque Centrale Génie Chimique Disponible Consultation sur place The technology of catalytic oxidations, 1. Chemical, catalytic & engineering aspects / Philippe Arpentinier ; Fabrizio Cavani ; Ferruccio Trifirò
Titre de série : The technology of catalytic oxidations, 1 Titre : Chemical, catalytic & engineering aspects Type de document : texte imprimé Auteurs : Philippe Arpentinier, Auteur ; Fabrizio Cavani, Auteur ; Ferruccio Trifirò, Auteur Editeur : Paris : Technip Année de publication : 2001 Importance : XXXI-324-[X] p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-2-7108-0793-3 Note générale : Bibliogr. Index. ISBN 2-7108-0777-7 (complète édition) Langues : Anglais (eng) Mots-clés : Oxydation
Catalyse -- Applications industrielles
Réacteurs chimiques
Hydrocarbures -- OxydationIndex. décimale : 66.094.37 Oxydation catalytique Résumé : This work is useful for both industrial and academic chemists and chemical engineers who work in the field of catalytic oxidation. Moreover, since it examines the general question of oxidation reactions, this book can be used as a text for students pursuing university studies in industrial chemistry, chemical reaction engineering and safety in the chemical industry. The first volume covers the most important technological aspects of the use of molecular oxygen for catalytic oxidation reactions. Particular attention is paid to the following issues: Chemical and chemical-physical characteristics of the activation of molecular oxygen; Engineering concerns in the design of reactors for monophase and multiphase catalytic reactions... Note de contenu : Contents
*Introduction
*Chemical-physical properties of molecular oxygen
*Oxygen production technologies
*Chemical fundamentals of oxidation reactions
*Reactor technologies for multiphase systems
*Liquid phase oxidations
*Gas phase selective oxidations
*Selective oxidation of paraffinsThe technology of catalytic oxidations, 1. Chemical, catalytic & engineering aspects [texte imprimé] / Philippe Arpentinier, Auteur ; Fabrizio Cavani, Auteur ; Ferruccio Trifirò, Auteur . - Paris : Technip, 2001 . - XXXI-324-[X] p. : ill. ; 25 cm.
ISBN : 978-2-7108-0793-3
Bibliogr. Index. ISBN 2-7108-0777-7 (complète édition)
Langues : Anglais (eng)
Mots-clés : Oxydation
Catalyse -- Applications industrielles
Réacteurs chimiques
Hydrocarbures -- OxydationIndex. décimale : 66.094.37 Oxydation catalytique Résumé : This work is useful for both industrial and academic chemists and chemical engineers who work in the field of catalytic oxidation. Moreover, since it examines the general question of oxidation reactions, this book can be used as a text for students pursuing university studies in industrial chemistry, chemical reaction engineering and safety in the chemical industry. The first volume covers the most important technological aspects of the use of molecular oxygen for catalytic oxidation reactions. Particular attention is paid to the following issues: Chemical and chemical-physical characteristics of the activation of molecular oxygen; Engineering concerns in the design of reactors for monophase and multiphase catalytic reactions... Note de contenu : Contents
*Introduction
*Chemical-physical properties of molecular oxygen
*Oxygen production technologies
*Chemical fundamentals of oxidation reactions
*Reactor technologies for multiphase systems
*Liquid phase oxidations
*Gas phase selective oxidations
*Selective oxidation of paraffinsExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 045209 66.094.37 ARP Papier Bibliothèque Centrale Génie Chimique Disponible 047544 66.094.37 ARP Papier Bibliothèque Centrale Génie Chimique Disponible The technology of catalytic oxidations, 2. Safety aspects / Philippe Arpentinier ; Fabrizio Cavani ; Ferruccio Trifirò
Titre de série : The technology of catalytic oxidations, 2 Titre : Safety aspects Type de document : texte imprimé Auteurs : Philippe Arpentinier, Auteur ; Fabrizio Cavani, Auteur ; Ferruccio Trifirò, Auteur Editeur : Paris : Technip Année de publication : 2001 Importance : XXXI-(325-764)p. Présentation : ill Format : 25 cm ISBN/ISSN/EAN : 978-2-7108-0794-0 Note générale : Bibliogr. Index. ISBN 2-7108-0777-7 (complète édition) Langues : Anglais (eng) Mots-clés : Oxydation
Catalyse
Mesures de sûreté
Risques industriels
Catalyse -- Applications industrielles
Explosions -- PréventionIndex. décimale : 66.094.37 Oxydation catalytique Résumé : Addresses the safety issues associated with the use of oxygen in catalytic oxidation reactions. Safety requirements for industrial processes call for precise knowledge of the flammability and detonability limits of the reactant mixtures under operating conditions. Equally important is a full comprehension of the theoretical notions that govern the ignition of gases and vapors, whether by an external energy source, or by spontaneous ignition. Unfortunately, there is a general lack of data for mixtures under non-standard temperature and pressure conditions and for mixtures that are confined to the specific geometric conditions imposed by industrial processes. For this reason, the aim of this volume is to discuss the theory of chemical explosions in general, including the flammability of gases and liquids, and spontaneous ignition, in particular. Furthermore, it briefly presents preventive and protective measures needed to ensure the safety of chemical processes. Note de contenu : Contents
*Introduction to safety problems in the chemical industry
*Chemical aspects of combustion in the gaseous phase
*Homogeneous chemical explosions: auto-ignition or spontaneous ignition
*Deflagration or propagation of flame
*Conditions governing flame propagation capability
*Detonation in gaseous phase
*Prevention of and protection against explosionsThe technology of catalytic oxidations, 2. Safety aspects [texte imprimé] / Philippe Arpentinier, Auteur ; Fabrizio Cavani, Auteur ; Ferruccio Trifirò, Auteur . - Paris : Technip, 2001 . - XXXI-(325-764)p. : ill ; 25 cm.
ISBN : 978-2-7108-0794-0
Bibliogr. Index. ISBN 2-7108-0777-7 (complète édition)
Langues : Anglais (eng)
Mots-clés : Oxydation
Catalyse
Mesures de sûreté
Risques industriels
Catalyse -- Applications industrielles
Explosions -- PréventionIndex. décimale : 66.094.37 Oxydation catalytique Résumé : Addresses the safety issues associated with the use of oxygen in catalytic oxidation reactions. Safety requirements for industrial processes call for precise knowledge of the flammability and detonability limits of the reactant mixtures under operating conditions. Equally important is a full comprehension of the theoretical notions that govern the ignition of gases and vapors, whether by an external energy source, or by spontaneous ignition. Unfortunately, there is a general lack of data for mixtures under non-standard temperature and pressure conditions and for mixtures that are confined to the specific geometric conditions imposed by industrial processes. For this reason, the aim of this volume is to discuss the theory of chemical explosions in general, including the flammability of gases and liquids, and spontaneous ignition, in particular. Furthermore, it briefly presents preventive and protective measures needed to ensure the safety of chemical processes. Note de contenu : Contents
*Introduction to safety problems in the chemical industry
*Chemical aspects of combustion in the gaseous phase
*Homogeneous chemical explosions: auto-ignition or spontaneous ignition
*Deflagration or propagation of flame
*Conditions governing flame propagation capability
*Detonation in gaseous phase
*Prevention of and protection against explosionsExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 045210 66.094.37 ARP Papier Bibliothèque Centrale Génie Chimique Disponible 047545 66.094.37 ARP Papier Bibliothèque Centrale Génie Chimique Disponible