Les Inscriptions à la Bibliothèque sont ouvertes en
ligne via le site: https://biblio.enp.edu.dz
Les Réinscriptions se font à :
• La Bibliothèque Annexe pour les étudiants en
2ème Année CPST
• La Bibliothèque Centrale pour les étudiants en Spécialités
A partir de cette page vous pouvez :
Retourner au premier écran avec les recherches... |
. Bibliothèque Centrale
Electronique > Industries, Artisanats et commerces de produits finis ou assembles
Advanced control for constrained processes and systems / Fabricio Garelli
Titre : Advanced control for constrained processes and systems Type de document : texte imprimé Auteurs : Fabricio Garelli, Auteur ; Ricardo J. Mantz, Auteur ; Hernán De Battista, Auteur Editeur : London : The institution of engineering and technology Année de publication : 2011 Collection : IET Control engineering series num. 75 Importance : VIII, X, 256 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-1-84919-261-3 Note générale : Bibliogr. p. 197. - Index Langues : Anglais (eng) Mots-clés : Advanced control -- Constrained processes -- Systems
MIMO systems
SISO control
SISO systems
Dynamic decoupling
Command, Theory of
Non-linear controlIndex. décimale : 681.5 Technologie de la commande automatique. Technologie intelligence. systèmes de contrôle. Automation Résumé :
The book aims at providing solutions which can be added to pre-existent control designs, and that allow using conventional control tools for the main loop design. Switching signals are always confined to the low-power side of the systems, so that the implementation of the control schemes results extremely easy, both analogously or digitally.
The first part of the book (Part I) focuses on providing a description as simple as possible of the methodology to deal with systems constraints in SISO systems. It also illustrates the design and implementation of the developed techniques through several case studies. Part II is devoted to multivariable constrained control problems.
Finally, the book presents an extremely simple algorithm for the reduction of the undesired effects caused by manual-automatic or controller switching in multivariable process control.Note de contenu : Summary :
1. SISO systems - Constraints in feedback systems
2. Dealing with constraints in SISO control
3. Some practical case studies
4. MIMO systems - Relevant tools for dynamic decoupling
5. Constrained dynamic decoupling
6. Improving decoupling in decentralized control
7. Partial decoupling and non-minimum phase systems
8. MIMO bumpless transferAdvanced control for constrained processes and systems [texte imprimé] / Fabricio Garelli, Auteur ; Ricardo J. Mantz, Auteur ; Hernán De Battista, Auteur . - The institution of engineering and technology, 2011 . - VIII, X, 256 p. : ill. ; 24 cm. - (IET Control engineering series; 75) .
ISBN : 978-1-84919-261-3
Bibliogr. p. 197. - Index
Langues : Anglais (eng)
Mots-clés : Advanced control -- Constrained processes -- Systems
MIMO systems
SISO control
SISO systems
Dynamic decoupling
Command, Theory of
Non-linear controlIndex. décimale : 681.5 Technologie de la commande automatique. Technologie intelligence. systèmes de contrôle. Automation Résumé :
The book aims at providing solutions which can be added to pre-existent control designs, and that allow using conventional control tools for the main loop design. Switching signals are always confined to the low-power side of the systems, so that the implementation of the control schemes results extremely easy, both analogously or digitally.
The first part of the book (Part I) focuses on providing a description as simple as possible of the methodology to deal with systems constraints in SISO systems. It also illustrates the design and implementation of the developed techniques through several case studies. Part II is devoted to multivariable constrained control problems.
Finally, the book presents an extremely simple algorithm for the reduction of the undesired effects caused by manual-automatic or controller switching in multivariable process control.Note de contenu : Summary :
1. SISO systems - Constraints in feedback systems
2. Dealing with constraints in SISO control
3. Some practical case studies
4. MIMO systems - Relevant tools for dynamic decoupling
5. Constrained dynamic decoupling
6. Improving decoupling in decentralized control
7. Partial decoupling and non-minimum phase systems
8. MIMO bumpless transferExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 055198 681.5 GAR Papier Bibliothèque Centrale Electronique Disponible Consultation sur place Le Basic universel / Richard Schomberg
Titre : Le Basic universel Type de document : texte imprimé Auteurs : Richard Schomberg, Auteur Editeur : Paris : Eyrolles Année de publication : 1982 Collection : Micro-ordinateurs Importance : IX-116 p. Format : 22 cm Langues : Français (fre) Mots-clés : BASIC (langage de programmation) Index. décimale : 681.3.06 Logiciels. Software Résumé :
Le Basic universel s'adresse ç ceux qui n'ont jamais programmé et qui désirent aborder le BASIC pour la première fois. Il explique, à l'aide d'exemples, comment programmer en BASIC, et tout simplement comment programmer, car les concepts exposés dans le cadre du BASIC se retrouvent dans de nombreux langages.Note de contenu : Au sommaire :
- Qu'est-ce qu'un ordinateur ?
- Programmes et langages
- Exécution d'un programme
- Introduction au basic
- Instruction d'affectation LET
- Instruction PRINT
- Compléments à k'instruction PRINT
- Instruction INPUT
- Instruction REZD-DATA-RESTORE
- Résoudre des probèmes avec un ordinateur
- Instructions de branchement GO TO
...Le Basic universel [texte imprimé] / Richard Schomberg, Auteur . - Eyrolles, 1982 . - IX-116 p. ; 22 cm. - (Micro-ordinateurs) .
Langues : Français (fre)
Mots-clés : BASIC (langage de programmation) Index. décimale : 681.3.06 Logiciels. Software Résumé :
Le Basic universel s'adresse ç ceux qui n'ont jamais programmé et qui désirent aborder le BASIC pour la première fois. Il explique, à l'aide d'exemples, comment programmer en BASIC, et tout simplement comment programmer, car les concepts exposés dans le cadre du BASIC se retrouvent dans de nombreux langages.Note de contenu : Au sommaire :
- Qu'est-ce qu'un ordinateur ?
- Programmes et langages
- Exécution d'un programme
- Introduction au basic
- Instruction d'affectation LET
- Instruction PRINT
- Compléments à k'instruction PRINT
- Instruction INPUT
- Instruction REZD-DATA-RESTORE
- Résoudre des probèmes avec un ordinateur
- Instructions de branchement GO TO
...Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 031264 681.3.06 SCH Papier Bibliothèque Centrale Electronique Disponible 026208 681.3.06 SCH Papier Bibliothèque Centrale Informatique Disponible 026209 681.3.06 SCH Papier Bibliothèque Centrale Informatique Disponible Computers and information systems / Fuori , William ; Gioia , Louis
Titre : Computers and information systems Type de document : texte imprimé Auteurs : Fuori , William, Auteur ; Gioia , Louis Mention d'édition : 4 éd. Editeur : London : Prentice-Hall Année de publication : 1991 Importance : XXVII-546 p. Présentation : ill. Format : 30 cm ISBN/ISSN/EAN : 978-0-13-235722-7 Note générale : Glossary.-Index. Langues : Français (fre) Mots-clés : Traitement ordinateur--Electronique
Data communications
Cmputeur systemIndex. décimale : 681.3 Appareils et matériel de traitement de données. Informatique Note de contenu : Sommaire:
1- Introduction to the world of computers : wahat are they ; and how do they affect us?
2- The cmputeur system in a nutshell
3- Input/output media and devices : wath goes in and what comes out
4- Primary and secondary storage; and file processing: the computer's file cabinet
5- The processor unit : from the mainframe to the microcomputer
6- Data communications: Bringing the world closer together
...Computers and information systems [texte imprimé] / Fuori , William, Auteur ; Gioia , Louis . - 4 éd. . - London : Prentice-Hall, 1991 . - XXVII-546 p. : ill. ; 30 cm.
ISBN : 978-0-13-235722-7
Glossary.-Index.
Langues : Français (fre)
Mots-clés : Traitement ordinateur--Electronique
Data communications
Cmputeur systemIndex. décimale : 681.3 Appareils et matériel de traitement de données. Informatique Note de contenu : Sommaire:
1- Introduction to the world of computers : wahat are they ; and how do they affect us?
2- The cmputeur system in a nutshell
3- Input/output media and devices : wath goes in and what comes out
4- Primary and secondary storage; and file processing: the computer's file cabinet
5- The processor unit : from the mainframe to the microcomputer
6- Data communications: Bringing the world closer together
...Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 044454 681.3 FUO Papier Bibliothèque Centrale Electronique Disponible Data fusion for sensory information processing systems / James J. Clark
Titre : Data fusion for sensory information processing systems Type de document : texte imprimé Auteurs : James J. Clark, Auteur ; Alan L. Yuille, Auteur Editeur : Boston : Kluwer academic publishers Année de publication : 1990 Collection : The kluwer international series in engineering and computer science Sous-collection : Robotics: vision, manipulation and sensors num. 105 Importance : XVIII-242 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7923-9120-3 Note générale : Bibliogr. p. 223-238. Index Langues : Anglais (eng) Mots-clés : Computer vision
Image processing
Multisensor data fusion
Vision par ordinateur
Traitement d'images
Fusion multicapteursIndex. décimale : 681.3.02 Conception,construction et structures des systèmes machines et éléments de traitement de données.(Conception des systèmes) Résumé : Data fusion for sensory information processing systems provides a mathematical foundation upon which data fusion algorithms can be constructed and analyzed. The methodology presented in this text is motivated by a strong belief in the importance of constraints in sensory information processing systems. In this view, data fusion is best understood as the embedding of multiple constraints on the solution to a sensory information processing problem into the solution process. Note de contenu : Contents:
1. Introduction: The Role of Data Fusion in Sensory Systems.
2. Bayesian Sensory Information Processing.
3. Information Processing Using Energy Function Minimization.
4. Weakly vs. Strongly Coupled Data Fusion: A Classification of Fusional Methods.
5. Data Fusion Applied to Feature Based Stereo Algorithms.
6. Fusing Binocular and Monocular Depth Cues.
7. Data Fusion in Shape from Shading Algorithms.
8. Temporal Aspects of Data Fusion.
9. Towards a Constraint Based Theory of Sensory Data Fusion.Data fusion for sensory information processing systems [texte imprimé] / James J. Clark, Auteur ; Alan L. Yuille, Auteur . - Kluwer academic publishers, 1990 . - XVIII-242 p. : ill. ; 25 cm. - (The kluwer international series in engineering and computer science. Robotics: vision, manipulation and sensors; 105) .
ISBN : 978-0-7923-9120-3
Bibliogr. p. 223-238. Index
Langues : Anglais (eng)
Mots-clés : Computer vision
Image processing
Multisensor data fusion
Vision par ordinateur
Traitement d'images
Fusion multicapteursIndex. décimale : 681.3.02 Conception,construction et structures des systèmes machines et éléments de traitement de données.(Conception des systèmes) Résumé : Data fusion for sensory information processing systems provides a mathematical foundation upon which data fusion algorithms can be constructed and analyzed. The methodology presented in this text is motivated by a strong belief in the importance of constraints in sensory information processing systems. In this view, data fusion is best understood as the embedding of multiple constraints on the solution to a sensory information processing problem into the solution process. Note de contenu : Contents:
1. Introduction: The Role of Data Fusion in Sensory Systems.
2. Bayesian Sensory Information Processing.
3. Information Processing Using Energy Function Minimization.
4. Weakly vs. Strongly Coupled Data Fusion: A Classification of Fusional Methods.
5. Data Fusion Applied to Feature Based Stereo Algorithms.
6. Fusing Binocular and Monocular Depth Cues.
7. Data Fusion in Shape from Shading Algorithms.
8. Temporal Aspects of Data Fusion.
9. Towards a Constraint Based Theory of Sensory Data Fusion.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 041576 681.3.02 CLA Papier Bibliothèque Centrale Electronique Disponible En bon état Developments in control theory towards glocal control / Li Qiu
Titre : Developments in control theory towards glocal control Type de document : texte imprimé Auteurs : Li Qiu, Auteur ; Shinji Hara, Auteur Editeur : London : The institution of engineering and technology Année de publication : 2012 Collection : IET Control engineering series num. 76 Importance : xxiv-200 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-1-84919-533-1 Note générale : "This volume contains articles by the invited speakers for the symposium, "Developments in Control Theory towards Global Control", held in honor of (Shinji Hara) ... at the University of Tokyo on January 6-7, 2012" -- Preface
Bibliogr.P. 191.- Index. P.195Langues : Français (fre) Mots-clés : Control theory -- Congresses
Control theory -- Mathematical models -- Congresses
Commande Théorie Commande Théorie-- Modèles mathématiquesIndex. décimale : 681.515 Systèmes de commande ou de contrôle automatique suivant une loi de contrôle Résumé : Honouring the lifelong, celebrated contributions of Professor Shinji Hara to the developments of numerous control theories, this book features a collection of the latest papers from leading researchers in the field. The results presented in the book lay a solid foundation for new control theories to be developed in the future. The book explores the key concept of glocal control. The term ‘glocal’ is derived from ‘global’ and ‘local’, and glocal control is a technical term in the field of control engineering, coined by Prof. Hara, which means control of dynamical systems with local sensing and actuation to achieve a desired global behaviour. A large number of dynamical components can be interconnected and interact with each other to form an integrated system with certain functionalities. Such complex systems are found in nature and have been created by man, including gene regulatory networks, neuronal circuits for memory, bird flocking, electrical power grids, and financial markets. A common feature of these systems is that a global property or function emerges as a result of local, distributed, dynamical interactions of components. The objective of glocal control is to understand the mechanisms underlying this feature, analysing existing complex systems, and to design and create innovative systems with new functionalities. The concept of glocal control has been gaining much attention recently in the control engineering community and is an emerging research interest. Note de contenu : Sommaire:
Selected Publications of Shinji Hara xvii
List of Contributors xxiii
PART I Robust and Optimal Control
1 Measurement-based control design for unknown systems
2 Quantized linear quadratic Gaussian control for scalar systems
3 Robust H? filter design for nonuniformly sampled systems
4 Analysis of frequency response across switching
5 Optimal tracking and power allocation over AWN feedback channels
6 Stability analysis for a class of Hamiltonian systems with digital control
PART II Mathematical System and Control Theory
7 Maximizing mutual information between random variables and applications to order reduction of stochastic processes
8 On compact sets in the graph topology
9 Matrix pencils in time and frequency domain system identification
10 Identification of nonparametric piecewise affine models via data compression
11 Performance benefits in two-axle railway vehicle suspensions employing inerters
12 Stabilization of quantum spin systems via continuous feedback control
PART III Networked Dynamical Systems and Glocal Control
13 Combining distance-based formation shape control with formation translation
14 Energy management in wireless sensor networks
15 Distributed randomized PageRank algorithms over unreliable channels
16 Stabilization of multi-input networked control systems over additive white Gaussian noise channels
17 Clustering of large-scale dynamical networks for glocal control
18 Glocal control for natural oscillationsDevelopments in control theory towards glocal control [texte imprimé] / Li Qiu, Auteur ; Shinji Hara, Auteur . - The institution of engineering and technology, 2012 . - xxiv-200 p. : ill. ; 24 cm. - (IET Control engineering series; 76) .
ISBN : 978-1-84919-533-1
"This volume contains articles by the invited speakers for the symposium, "Developments in Control Theory towards Global Control", held in honor of (Shinji Hara) ... at the University of Tokyo on January 6-7, 2012" -- Preface
Bibliogr.P. 191.- Index. P.195
Langues : Français (fre)
Mots-clés : Control theory -- Congresses
Control theory -- Mathematical models -- Congresses
Commande Théorie Commande Théorie-- Modèles mathématiquesIndex. décimale : 681.515 Systèmes de commande ou de contrôle automatique suivant une loi de contrôle Résumé : Honouring the lifelong, celebrated contributions of Professor Shinji Hara to the developments of numerous control theories, this book features a collection of the latest papers from leading researchers in the field. The results presented in the book lay a solid foundation for new control theories to be developed in the future. The book explores the key concept of glocal control. The term ‘glocal’ is derived from ‘global’ and ‘local’, and glocal control is a technical term in the field of control engineering, coined by Prof. Hara, which means control of dynamical systems with local sensing and actuation to achieve a desired global behaviour. A large number of dynamical components can be interconnected and interact with each other to form an integrated system with certain functionalities. Such complex systems are found in nature and have been created by man, including gene regulatory networks, neuronal circuits for memory, bird flocking, electrical power grids, and financial markets. A common feature of these systems is that a global property or function emerges as a result of local, distributed, dynamical interactions of components. The objective of glocal control is to understand the mechanisms underlying this feature, analysing existing complex systems, and to design and create innovative systems with new functionalities. The concept of glocal control has been gaining much attention recently in the control engineering community and is an emerging research interest. Note de contenu : Sommaire:
Selected Publications of Shinji Hara xvii
List of Contributors xxiii
PART I Robust and Optimal Control
1 Measurement-based control design for unknown systems
2 Quantized linear quadratic Gaussian control for scalar systems
3 Robust H? filter design for nonuniformly sampled systems
4 Analysis of frequency response across switching
5 Optimal tracking and power allocation over AWN feedback channels
6 Stability analysis for a class of Hamiltonian systems with digital control
PART II Mathematical System and Control Theory
7 Maximizing mutual information between random variables and applications to order reduction of stochastic processes
8 On compact sets in the graph topology
9 Matrix pencils in time and frequency domain system identification
10 Identification of nonparametric piecewise affine models via data compression
11 Performance benefits in two-axle railway vehicle suspensions employing inerters
12 Stabilization of quantum spin systems via continuous feedback control
PART III Networked Dynamical Systems and Glocal Control
13 Combining distance-based formation shape control with formation translation
14 Energy management in wireless sensor networks
15 Distributed randomized PageRank algorithms over unreliable channels
16 Stabilization of multi-input networked control systems over additive white Gaussian noise channels
17 Clustering of large-scale dynamical networks for glocal control
18 Glocal control for natural oscillationsExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 055213 681.515 DEV Papier Bibliothèque Centrale Electronique Disponible 055212 681.515 DEV Papier Bibliothèque Centrale Electronique Disponible Dynamic analysis of robot manipulators / Constantinos A. Balafoutis
Titre : Dynamic analysis of robot manipulators : a cartesian tensor approach Type de document : texte imprimé Auteurs : Constantinos A. Balafoutis, Auteur ; Rajnikant V. Patel, Auteur Editeur : Boston : Kluwer academic publishers Année de publication : 1991 Collection : The kluwer international series in engineering and computer science Sous-collection : Robotics: vision, manipulation and sensors num. 131 Importance : XII-292 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-0-7923-9145-6 Note générale : Bibliogr. p. 247-249. Index Langues : Anglais (eng) Mots-clés : Manipulateurs (mécanismes)
RobotiqueIndex. décimale : 681.5 Technologie de la commande automatique. Technologie intelligence. systèmes de contrôle. Automation Résumé : Dynamic analysis of robot manipulators: A crtesian tensor approach presents computationally efficient algorithms for solving basic problems in robot manipulator dynamics. In particular, the following problems of rigid-link open-chain manipulator dynamics are considered:
* Computation of inverse dynamics.
* Computation of forward dynamics.
* Generation of linearized dynamics models.
Computationally efficient solutions of these problems are prerequisites for real-time robot applications and simulations.Note de contenu : Contents:
* Notation, Terminology and Background Material.
* Cartesian Tensor Analysis.
* Cartesian Tensors and Rigid Body Motion.
* Manipulator Inverse Dynamics.
* Manipulator Forward Dynamics.
* Linearized Dynamic Robot Models.Dynamic analysis of robot manipulators : a cartesian tensor approach [texte imprimé] / Constantinos A. Balafoutis, Auteur ; Rajnikant V. Patel, Auteur . - Kluwer academic publishers, 1991 . - XII-292 p. : ill. ; 24 cm. - (The kluwer international series in engineering and computer science. Robotics: vision, manipulation and sensors; 131) .
ISBN : 978-0-7923-9145-6
Bibliogr. p. 247-249. Index
Langues : Anglais (eng)
Mots-clés : Manipulateurs (mécanismes)
RobotiqueIndex. décimale : 681.5 Technologie de la commande automatique. Technologie intelligence. systèmes de contrôle. Automation Résumé : Dynamic analysis of robot manipulators: A crtesian tensor approach presents computationally efficient algorithms for solving basic problems in robot manipulator dynamics. In particular, the following problems of rigid-link open-chain manipulator dynamics are considered:
* Computation of inverse dynamics.
* Computation of forward dynamics.
* Generation of linearized dynamics models.
Computationally efficient solutions of these problems are prerequisites for real-time robot applications and simulations.Note de contenu : Contents:
* Notation, Terminology and Background Material.
* Cartesian Tensor Analysis.
* Cartesian Tensors and Rigid Body Motion.
* Manipulator Inverse Dynamics.
* Manipulator Forward Dynamics.
* Linearized Dynamic Robot Models.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 041620 681.5 BAL Papier Bibliothèque Centrale Electronique Disponible En bon état from pixels to predicates / Alex P. Pentland
Titre : from pixels to predicates : recent advances in computational and robotic vision Type de document : texte imprimé Auteurs : Alex P. Pentland, Editeur scientifique Editeur : Ablex Publishing Corporation Année de publication : 1986 Collection : Ablex series in artificial inteligence Importance : XVIII-398p ISBN/ISSN/EAN : 0-8991-237-9 Langues : Français (fre) Mots-clés : vision par ordinateur vision artificielle Index. décimale : 681.3.02 Conception,construction et structures des systèmes machines et éléments de traitement de données.(Conception des systèmes) from pixels to predicates : recent advances in computational and robotic vision [texte imprimé] / Alex P. Pentland, Editeur scientifique . - Ablex Publishing Corporation, 1986 . - XVIII-398p. - (Ablex series in artificial inteligence) .
ISSN : 0-8991-237-9
Langues : Français (fre)
Mots-clés : vision par ordinateur vision artificielle Index. décimale : 681.3.02 Conception,construction et structures des systèmes machines et éléments de traitement de données.(Conception des systèmes) Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 036537 681.3.02 FRO Papier Bibliothèque Centrale Electronique Disponible En bon état Introduction à la technique de l'ordinateur / Alexandra I. Forsythe
Titre : Introduction à la technique de l'ordinateur Type de document : texte imprimé Auteurs : Alexandra I. Forsythe, Auteur ; Thomas A. Keenan, Auteur ; Elliott I. Organick, Auteur ; Warren Stenberg, Auteur ; Roland Baduel, Traducteur Editeur : Paris : Masson Année de publication : 1974 Importance : XVI-392 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-2-225-38302-1 Note générale : Titre original : "Computer science". Index Langues : Français (fre) Langues originales : Anglais (eng) Mots-clés : Concepts de base -- Application numérique
Ordinateurs
InformatiqueIndex. décimale : 681.3 Appareils et matériel de traitement de données. Informatique Note de contenu : Sommaire:
Partie 1: Concepts de base:
1. Algorithmes et ordinateurs
2. Le langage d'organigramme
3. Concepts supplémentaires sur les organigrammes
4. Les boucles
5. Approximations
Partie 2: Applications numérique:
6. Fonctions et procédures
7. Quelques applications mathématiques
8. D'autres applications mathématiques
9. SAMOSIntroduction à la technique de l'ordinateur [texte imprimé] / Alexandra I. Forsythe, Auteur ; Thomas A. Keenan, Auteur ; Elliott I. Organick, Auteur ; Warren Stenberg, Auteur ; Roland Baduel, Traducteur . - Paris : Masson, 1974 . - XVI-392 p. : ill. ; 24 cm.
ISBN : 978-2-225-38302-1
Titre original : "Computer science". Index
Langues : Français (fre) Langues originales : Anglais (eng)
Mots-clés : Concepts de base -- Application numérique
Ordinateurs
InformatiqueIndex. décimale : 681.3 Appareils et matériel de traitement de données. Informatique Note de contenu : Sommaire:
Partie 1: Concepts de base:
1. Algorithmes et ordinateurs
2. Le langage d'organigramme
3. Concepts supplémentaires sur les organigrammes
4. Les boucles
5. Approximations
Partie 2: Applications numérique:
6. Fonctions et procédures
7. Quelques applications mathématiques
8. D'autres applications mathématiques
9. SAMOSExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 016084 681.3 INT Papier Bibliothèque Centrale Electronique Disponible Consultation sur place Modules de mixage / Philippe Martinak
Titre : Modules de mixage Type de document : texte imprimé Auteurs : Philippe Martinak, Auteur Editeur : Paris : ETSF Année de publication : 1998 Importance : 117 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-2-10-003890-9 Note générale : La couv. porte en plus : "21 modules de tables de mixage pour la sonorisation et l'enregistrement Langues : Français (fre) Mots-clés : Son -- Enregistrement et reproduction -- Appareils et matériel
Enregistrements sonores -- Production et réalisation
Sonorisation
Tables de mixageIndex. décimale : 681.84 Enregistrement et reproduction du son Résumé : Le rôle principal d'une table de mixage est d'assurer le mélange d'un nombre variable de signaux d'entrée pour les envoyer vers une sortie, qui peut être destinée à un système d'amplification et/ou d'enregistrement. Dans la pratique, la fonction d'une table de mixage va bien au-delà du simple mélange des sources. Une approche modulaire a été retenue pour ce livre qui a pour objectif d'être à la fois pédagogique et pratique. Il décrit et explique les différents modules de base qui entrent dans la composition des tables de mixage utilisées en sonorisation et en enregistrement musical : fonction de mélange, sous-groupes, départs auxiliaires, préamplificateurs et circuits de traitements. Le texte est accompagné de synoptiques qui montrent comment les différents modules se connectent entre eux pour constituer une table de mixage. L'auteur en présente trois exemples de complexité croissante, dont les modules électroniques sont accompagnés de leurs schémas, de dessins de circuits imprimés et de listes de composants. Des modules complémentaires, tels que des préamplificateurs et des correcteurs de timbre, sont également proposés. Que vous soyez professionnel, étudiant ou simple amateur d'électronique, cet ouvrage vous permettra de modifier et d'adopter facilement vos modules pour votre propre usage. Note de contenu :
Structures et modèles de tables de mixage.
Modules du mélangeur stéréo.
Modules de la table de mixage avec départs auxiliaires.
Modules de la table de mixage avec sous-groupes.
Modules préamplificateurs.
Modules de traitement.Modules de mixage [texte imprimé] / Philippe Martinak, Auteur . - Paris : ETSF, 1998 . - 117 p. : ill. ; 24 cm.
ISBN : 978-2-10-003890-9
La couv. porte en plus : "21 modules de tables de mixage pour la sonorisation et l'enregistrement
Langues : Français (fre)
Mots-clés : Son -- Enregistrement et reproduction -- Appareils et matériel
Enregistrements sonores -- Production et réalisation
Sonorisation
Tables de mixageIndex. décimale : 681.84 Enregistrement et reproduction du son Résumé : Le rôle principal d'une table de mixage est d'assurer le mélange d'un nombre variable de signaux d'entrée pour les envoyer vers une sortie, qui peut être destinée à un système d'amplification et/ou d'enregistrement. Dans la pratique, la fonction d'une table de mixage va bien au-delà du simple mélange des sources. Une approche modulaire a été retenue pour ce livre qui a pour objectif d'être à la fois pédagogique et pratique. Il décrit et explique les différents modules de base qui entrent dans la composition des tables de mixage utilisées en sonorisation et en enregistrement musical : fonction de mélange, sous-groupes, départs auxiliaires, préamplificateurs et circuits de traitements. Le texte est accompagné de synoptiques qui montrent comment les différents modules se connectent entre eux pour constituer une table de mixage. L'auteur en présente trois exemples de complexité croissante, dont les modules électroniques sont accompagnés de leurs schémas, de dessins de circuits imprimés et de listes de composants. Des modules complémentaires, tels que des préamplificateurs et des correcteurs de timbre, sont également proposés. Que vous soyez professionnel, étudiant ou simple amateur d'électronique, cet ouvrage vous permettra de modifier et d'adopter facilement vos modules pour votre propre usage. Note de contenu :
Structures et modèles de tables de mixage.
Modules du mélangeur stéréo.
Modules de la table de mixage avec départs auxiliaires.
Modules de la table de mixage avec sous-groupes.
Modules préamplificateurs.
Modules de traitement.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 046281 681.84 MAR Papier Bibliothèque Centrale Electronique Disponible 046280 681.84 MAR Papier Bibliothèque Centrale Electronique Disponible 043482 681.84 MAR Papier Bibliothèque Centrale Electronique Disponible Montres électriques et électroniques / Mermod , Jacques
Titre : Montres électriques et électroniques : étude de synthèse Type de document : texte imprimé Auteurs : Mermod , Jacques, Auteur Editeur : Suisses : Fédération des écoles techniques et jacques mermod Année de publication : 1977 Importance : 253 p. Présentation : ill. Format : 24 cm Note générale : Bibliogr. p. 277-282 Langues : Français (fre) Mots-clés : Électrique
ÉlectroniqueIndex. décimale : 681.11.03 Éléments constitutifs des appareils horaires Résumé :
A l'instant ou l’horlogerie s'engage résolument dans la voie de l'électrique, il nous est paru utile de faire le point sur plus de quinze années d'horlogerie électronique ; d’où l'idée d'établir une étude de synthèse aussi large que possible reposant.Note de contenu : sommaire :
Chapitre 1 : Schémas de principe, définition, classification
Chapitre 2 :L'entretien et la commande
Chapitre 3 : Circuits électroniques d’entretien
Chapitre 4 : Les générateurs d'intervalles de temps
Chapitre 5 : La division et le comptage
Chapitre 6 : L'affichage
Chapitre 7 : Les sources d’anergie électriqueMontres électriques et électroniques : étude de synthèse [texte imprimé] / Mermod , Jacques, Auteur . - Suisses : Fédération des écoles techniques et jacques mermod, 1977 . - 253 p. : ill. ; 24 cm.
Bibliogr. p. 277-282
Langues : Français (fre)
Mots-clés : Électrique
ÉlectroniqueIndex. décimale : 681.11.03 Éléments constitutifs des appareils horaires Résumé :
A l'instant ou l’horlogerie s'engage résolument dans la voie de l'électrique, il nous est paru utile de faire le point sur plus de quinze années d'horlogerie électronique ; d’où l'idée d'établir une étude de synthèse aussi large que possible reposant.Note de contenu : sommaire :
Chapitre 1 : Schémas de principe, définition, classification
Chapitre 2 :L'entretien et la commande
Chapitre 3 : Circuits électroniques d’entretien
Chapitre 4 : Les générateurs d'intervalles de temps
Chapitre 5 : La division et le comptage
Chapitre 6 : L'affichage
Chapitre 7 : Les sources d’anergie électriqueExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 034819 681.11.03 MER Papier Bibliothèque Centrale Electronique Disponible 034818 681.11.03 MER Papier Bibliothèque Centrale Electronique Disponible En bon état Nonlinear and adaptive control systems / Zhengtao Ding
Titre : Nonlinear and adaptive control systems Type de document : texte imprimé Auteurs : Zhengtao Ding, Auteur Editeur : London : The institution of engineering and technology Année de publication : 2013 Collection : IET Control engineering series num. 84 Importance : X, 277 p. Présentation : ill. Format : 24 cm ISBN/ISSN/EAN : 978-1-84919-574-4 Note générale : Bibliogr. p. 268-274. - Index Langues : Anglais (eng) Mots-clés : Adaptive control systems
Automatic control
Neural networks (Computer science)
Nonlinear control theoryIndex. décimale : 681.511.4 Systèmes de commande non linéaires Résumé :
Nonlinear and Adaptive Control Systems treats nonlinear control and adaptive control in a unified framework, presenting the major results at a moderate mathematical level, suitable to MSc students and engineers with undergraduate degrees. Topics covered include introduction to nonlinear systems; state space models; describing functions for common nonlinear components; stability theory; feedback linearization; adaptive control; nonlinear observer design; backstepping design; disturbance rejection and output regulation; and control applications, including harmonic estimation and rejection in power distribution systems, observer and control design for circadian rhythms, and suppression of flutters in aircraft.
Nonlinear and Adaptive Control Systems is of interest to postgraduate students and senior graduate students in control engineering, and in other engineering disciplines relating to dynamic modelling and control, including electrical and electronic engineering, aerospace engineering, and chemical engineering, as well as researchers and engineers working on nonlinear and adaptive control.Note de contenu : Summary :
1. Introduction to nonlinear and adaptive systems
2. State space models
3. Describing functions
4. Stability theory
5. Advanced stability theory
6. Feedback linearization
7. Adaptive control of linear systems
8. Nonlinear observer design
9. Backstepping design
10. Disturbance rejection and output regulation
11. Control applicationsNonlinear and adaptive control systems [texte imprimé] / Zhengtao Ding, Auteur . - The institution of engineering and technology, 2013 . - X, 277 p. : ill. ; 24 cm. - (IET Control engineering series; 84) .
ISBN : 978-1-84919-574-4
Bibliogr. p. 268-274. - Index
Langues : Anglais (eng)
Mots-clés : Adaptive control systems
Automatic control
Neural networks (Computer science)
Nonlinear control theoryIndex. décimale : 681.511.4 Systèmes de commande non linéaires Résumé :
Nonlinear and Adaptive Control Systems treats nonlinear control and adaptive control in a unified framework, presenting the major results at a moderate mathematical level, suitable to MSc students and engineers with undergraduate degrees. Topics covered include introduction to nonlinear systems; state space models; describing functions for common nonlinear components; stability theory; feedback linearization; adaptive control; nonlinear observer design; backstepping design; disturbance rejection and output regulation; and control applications, including harmonic estimation and rejection in power distribution systems, observer and control design for circadian rhythms, and suppression of flutters in aircraft.
Nonlinear and Adaptive Control Systems is of interest to postgraduate students and senior graduate students in control engineering, and in other engineering disciplines relating to dynamic modelling and control, including electrical and electronic engineering, aerospace engineering, and chemical engineering, as well as researchers and engineers working on nonlinear and adaptive control.Note de contenu : Summary :
1. Introduction to nonlinear and adaptive systems
2. State space models
3. Describing functions
4. Stability theory
5. Advanced stability theory
6. Feedback linearization
7. Adaptive control of linear systems
8. Nonlinear observer design
9. Backstepping design
10. Disturbance rejection and output regulation
11. Control applicationsExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 055240 681.511.4 DIN Papier Bibliothèque Centrale Electronique Disponible En bon état 055239 681.511.4 DIN Papier Bibliothèque Centrale Electronique Disponible Consultation sur place A pyramid framework for early vision / Jean-Michel Jolion
Titre : A pyramid framework for early vision : multiresolutional computer vision Type de document : texte imprimé Auteurs : Jean-Michel Jolion, Auteur ; Azriel Rosenfeld, Auteur Editeur : Boston : Kluwer academic publishers Année de publication : 1994 Collection : The kluwer international series in engineering and computer science Sous-collection : Robotics: vision, manipulation and sensors num. 251 Importance : XII-218 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7923-9402-0 Note générale : Bibliogr. p. 187-215. Index. Langues : Anglais (eng) Mots-clés : Computer vision -- Mathematical models
Vision par ordinateur -- Modèles mathématiques
Vision artificielle (robotique)Index. décimale : 681.3.02 Conception,construction et structures des systèmes machines et éléments de traitement de données.(Conception des systèmes) Résumé : Biological visual systems employ massively parallel processing to perform real-world visual tasks in real time. A key to this remarkable performance seems to be that biological systems construct representations of their visual image data at multiple scales. A Pyramid Framework for Early Vision describes a multiscale, or `pyramid', approach to vision, including its theoretical foundations, a set of pyramid-based modules for image processing, object detection, texture discrimination, contour detection and processing, feature detection and description, and motion detection and tracking. It also shows how these modules can be implemented very efficiently on hypercube-connected processor networks. A Pyramid Framework for Early Vision is intended for both students of vision and vision system designers; it provides a general approach to vision systems design as well as a set of robust, efficient vision modules. Note de contenu : Contents:
* Hierarchical Frameworks for Early Vision.
* Pyramid Based Visual Modules.
* Integration and Extensions.A pyramid framework for early vision : multiresolutional computer vision [texte imprimé] / Jean-Michel Jolion, Auteur ; Azriel Rosenfeld, Auteur . - Kluwer academic publishers, 1994 . - XII-218 p. : ill. ; 25 cm. - (The kluwer international series in engineering and computer science. Robotics: vision, manipulation and sensors; 251) .
ISBN : 978-0-7923-9402-0
Bibliogr. p. 187-215. Index.
Langues : Anglais (eng)
Mots-clés : Computer vision -- Mathematical models
Vision par ordinateur -- Modèles mathématiques
Vision artificielle (robotique)Index. décimale : 681.3.02 Conception,construction et structures des systèmes machines et éléments de traitement de données.(Conception des systèmes) Résumé : Biological visual systems employ massively parallel processing to perform real-world visual tasks in real time. A key to this remarkable performance seems to be that biological systems construct representations of their visual image data at multiple scales. A Pyramid Framework for Early Vision describes a multiscale, or `pyramid', approach to vision, including its theoretical foundations, a set of pyramid-based modules for image processing, object detection, texture discrimination, contour detection and processing, feature detection and description, and motion detection and tracking. It also shows how these modules can be implemented very efficiently on hypercube-connected processor networks. A Pyramid Framework for Early Vision is intended for both students of vision and vision system designers; it provides a general approach to vision systems design as well as a set of robust, efficient vision modules. Note de contenu : Contents:
* Hierarchical Frameworks for Early Vision.
* Pyramid Based Visual Modules.
* Integration and Extensions.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 041574 681.3.02 JOL Papier Bibliothèque Centrale Electronique Disponible En bon état Scale-space theory in computer vision / Tony Lindeberg
Titre : Scale-space theory in computer vision Type de document : texte imprimé Auteurs : Tony Lindeberg, Auteur Editeur : Boston : Kluwer academic publishers Année de publication : 1994 Collection : The kluwer international series in engineering and computer science Sous-collection : Robotics: vision, manipulation and sensors num. 256 Importance : XII-423 p. Présentation : ill. Format : 25 cm ISBN/ISSN/EAN : 978-0-7923-9418-1 Note générale : Bibliogr. p. 399-414. Index Langues : Anglais (eng) Mots-clés : vision par ordinateur vision artificielle Index. décimale : 681.3.02 Conception,construction et structures des systèmes machines et éléments de traitement de données.(Conception des systèmes) Résumé :
The fact that objects in the world appear in different ways has important implications when analyzing measured data, such as images, with automatic methods. This work describes a formal framework, called scale-space representation, for handling the notion of scale in image data.Note de contenu : Contents:
* Basic scale-space theory.
* The scale-space primal sketch: theory.
* The scale-space primal sketch: applications.
* Scale selection and shape computation in a visual front-end.Scale-space theory in computer vision [texte imprimé] / Tony Lindeberg, Auteur . - Kluwer academic publishers, 1994 . - XII-423 p. : ill. ; 25 cm. - (The kluwer international series in engineering and computer science. Robotics: vision, manipulation and sensors; 256) .
ISBN : 978-0-7923-9418-1
Bibliogr. p. 399-414. Index
Langues : Anglais (eng)
Mots-clés : vision par ordinateur vision artificielle Index. décimale : 681.3.02 Conception,construction et structures des systèmes machines et éléments de traitement de données.(Conception des systèmes) Résumé :
The fact that objects in the world appear in different ways has important implications when analyzing measured data, such as images, with automatic methods. This work describes a formal framework, called scale-space representation, for handling the notion of scale in image data.Note de contenu : Contents:
* Basic scale-space theory.
* The scale-space primal sketch: theory.
* The scale-space primal sketch: applications.
* Scale selection and shape computation in a visual front-end.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 041575 681.3.02 LIN Papier Bibliothèque Centrale Electronique Disponible En bon état TCP-IP / Douglas Comer
Titre : TCP-IP : architecture, protocoles, applications Type de document : texte imprimé Auteurs : Douglas Comer, Auteur ; Jean-Alain Hernandez, Traducteur ; Bruno Joachim, Traducteur ; René Joly, Traducteur Mention d'édition : 4 éd Editeur : Paris : Dunod Année de publication : 2001 Collection : InfoPro, ISSN ISSN 1774-28 Importance : XXXII-831p. Format : 25 cm ISBN/ISSN/EAN : 978-2-10-008181-3 Note générale : Bibliogr. Index Langues : Français (fre) Langues originales : Anglais (eng) Mots-clés : Architecture client-serveur (informatique)
Internet
TCP/IP (protocole de réseaux d'ordinateurs)
TCP/IP (Computer network protocol)Index. décimale : 681.3 Appareils et matériel de traitement de données. Informatique Résumé : Cet ouvrage, déjà plébiscité dans ses éditions précédentes pour son analyse approfondie de TCP/IP, a de nouveau été complété et actualisé. Il explique en détail les nouvelles avancées techniques, telles que les mobiles IP, l'interconnexion des réseaux privés, l'adressage multipoint (IGMP), la voix et la vidéo sur IP (RTP) ou la sécurité Internet (IPsec). Il présente aussi les dernières évolutions de IPv6. Les exercices de fin de chapitre et les différentes annexes (dont le classement thématique de plus de 2 000 RFC) font de ce livre un guide complet. A la fois support de cours et ouvrage de référence, il aidera l'étudiant comme le professionnel à connaître les arcanes de TCP/IP, ainsi qu'à maîtriser la conception, l'administration et l'utilisation d'Internet ou d'intranets. Note de contenu :
*Introduction et présentation générale
*Principaux réseaux englobés dans un internet
*Concepts de base et modèle d'un internet
*Les classes d'adresses Internet
*Mappage des adresses IP et des adresses physiques (ARP)
*Détermination d'une adresse IP au démarrage (RARP)
*Protocole IP : le remise des datagrammes en mode non connecté
*Protocole IP : le routage des datagrammes
*Protocole IP : les messages d'erreur et de supervision (ICMP)
*L'agrégation d 'adresses (CIDR) et le sous-adressage
*Structuration en couches de protocoles
*Protocole de datagramme utilisateur (UDP)
*Transport fiable en mode connecté (TCP)
*Routage : système central, pairs et algorithmes
...TCP-IP : architecture, protocoles, applications [texte imprimé] / Douglas Comer, Auteur ; Jean-Alain Hernandez, Traducteur ; Bruno Joachim, Traducteur ; René Joly, Traducteur . - 4 éd . - Dunod, 2001 . - XXXII-831p. ; 25 cm. - (InfoPro, ISSN ISSN 1774-28) .
ISBN : 978-2-10-008181-3
Bibliogr. Index
Langues : Français (fre) Langues originales : Anglais (eng)
Mots-clés : Architecture client-serveur (informatique)
Internet
TCP/IP (protocole de réseaux d'ordinateurs)
TCP/IP (Computer network protocol)Index. décimale : 681.3 Appareils et matériel de traitement de données. Informatique Résumé : Cet ouvrage, déjà plébiscité dans ses éditions précédentes pour son analyse approfondie de TCP/IP, a de nouveau été complété et actualisé. Il explique en détail les nouvelles avancées techniques, telles que les mobiles IP, l'interconnexion des réseaux privés, l'adressage multipoint (IGMP), la voix et la vidéo sur IP (RTP) ou la sécurité Internet (IPsec). Il présente aussi les dernières évolutions de IPv6. Les exercices de fin de chapitre et les différentes annexes (dont le classement thématique de plus de 2 000 RFC) font de ce livre un guide complet. A la fois support de cours et ouvrage de référence, il aidera l'étudiant comme le professionnel à connaître les arcanes de TCP/IP, ainsi qu'à maîtriser la conception, l'administration et l'utilisation d'Internet ou d'intranets. Note de contenu :
*Introduction et présentation générale
*Principaux réseaux englobés dans un internet
*Concepts de base et modèle d'un internet
*Les classes d'adresses Internet
*Mappage des adresses IP et des adresses physiques (ARP)
*Détermination d'une adresse IP au démarrage (RARP)
*Protocole IP : le remise des datagrammes en mode non connecté
*Protocole IP : le routage des datagrammes
*Protocole IP : les messages d'erreur et de supervision (ICMP)
*L'agrégation d 'adresses (CIDR) et le sous-adressage
*Structuration en couches de protocoles
*Protocole de datagramme utilisateur (UDP)
*Transport fiable en mode connecté (TCP)
*Routage : système central, pairs et algorithmes
...Exemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 046894 681.3 COM Papier Bibliothèque Centrale Electronique Disponible 046979 681.3 COM Papier Bibliothèque Centrale Informatique Disponible Téléphonie sur IP / Ouakil, Laurent
Titre : Téléphonie sur IP Type de document : texte imprimé Auteurs : Ouakil, Laurent, Auteur ; Guy Pujolle, Auteur ; Olivier Salvatori, Collaborateur Mention d'édition : 2 éd Editeur : Paris : Eyrolles Année de publication : 2008 Importance : XIX-466 p. Présentation : ill. Format : 23 cm ISBN/ISSN/EAN : 978-2-212-12359-3 Note générale : La couv. porte en plus : "SIP, H.323, MGCP, QoS et sécurité, Asterisk, VoWiFi, offre multiplay des FAI, Skype et autres softphones, architecture IMS..."
Bibliogr. p. [449]-451. Liste de sites internet. IndexLangues : Français (fre) Mots-clés : Téléphonie Internet
Couplage téléphonie-informatique
TCP/IP (protocole de réseaux d'ordinateurs)
Internet telephony
Telephone systems -- Data processing
TCP/IP (Computer network protocol)Index. décimale : 681.3.06 Logiciels. Software Résumé :
Technologies et solutions de téléphonie sur IP
La téléphonie sur IP s'impose progressivement dans tous les secteurs : la convergence vers un réseau tout IP s'accélère dans les entreprises, les fournisseurs d'accès généralisent leurs offres triple-play et quadruple-play incluant le service de téléphonie sur IP, des logiciels comme Skype, WLM, Yahoo ! Messenger ou Google Talk sont entrés dans les habitudes, sans parler de la téléphonie mobile qui devient hybride et s'adonne aux bienfaits du réseau IP.
Ce livre offre un vaste panorama des technologies et des solutions de téléphonie sur IP. Qu'apporte ce modèle par rapport au réseau téléphonique traditionnel ? Quels sont les protocoles mis en oeuvre ? Comment garantir la qualité de service, la sécurité et le nomadisme ? Quelles sont les difficultés rencontrées et comment les contourner ? Quelles sont les architectures types à déployer en entreprise ? Quels sont les logiciels grand public qui proposent ce type de service et comment les utiliser ? Comment installer et maintenir gratuitement son propre PBX avec Asterisk ? Que nous réserve la téléphonie du futur ? Telles sont les questions auxquelles ce livre tente d'apporter une réponse.
Cette seconde édition s'enrichit de nombreux compléments et exemples sur les dernières évolutions des technologies et des solutions logicielles et inclut, en particulier, un nouveau chapitre dédié à l'architecture IMS (IP Multimedia Subsystem).Note de contenu : Sommaire:
* Théorie de la ToIP:o Contraintes de la ToIP- La signalisation H.323-Le protocole SIP- Le protocole MGCP- La qualité de service
- Architecture et sécurité
* Pratique de la ToIP:La ToIP sur softphone- Skype- Windows Live Messenger et Yahoo! Messenger-Jabber et Google Talk
- Asterisk-La téléphonie chez les fournisseurs d'accès
o Filtrages des flux de ToIP
* Conclusion:Les cinq problèmes clés de la ToIP-L'architecture IMS
* Annexes :Références -IndexTéléphonie sur IP [texte imprimé] / Ouakil, Laurent, Auteur ; Guy Pujolle, Auteur ; Olivier Salvatori, Collaborateur . - 2 éd . - Paris : Eyrolles, 2008 . - XIX-466 p. : ill. ; 23 cm.
ISBN : 978-2-212-12359-3
La couv. porte en plus : "SIP, H.323, MGCP, QoS et sécurité, Asterisk, VoWiFi, offre multiplay des FAI, Skype et autres softphones, architecture IMS..."
Bibliogr. p. [449]-451. Liste de sites internet. Index
Langues : Français (fre)
Mots-clés : Téléphonie Internet
Couplage téléphonie-informatique
TCP/IP (protocole de réseaux d'ordinateurs)
Internet telephony
Telephone systems -- Data processing
TCP/IP (Computer network protocol)Index. décimale : 681.3.06 Logiciels. Software Résumé :
Technologies et solutions de téléphonie sur IP
La téléphonie sur IP s'impose progressivement dans tous les secteurs : la convergence vers un réseau tout IP s'accélère dans les entreprises, les fournisseurs d'accès généralisent leurs offres triple-play et quadruple-play incluant le service de téléphonie sur IP, des logiciels comme Skype, WLM, Yahoo ! Messenger ou Google Talk sont entrés dans les habitudes, sans parler de la téléphonie mobile qui devient hybride et s'adonne aux bienfaits du réseau IP.
Ce livre offre un vaste panorama des technologies et des solutions de téléphonie sur IP. Qu'apporte ce modèle par rapport au réseau téléphonique traditionnel ? Quels sont les protocoles mis en oeuvre ? Comment garantir la qualité de service, la sécurité et le nomadisme ? Quelles sont les difficultés rencontrées et comment les contourner ? Quelles sont les architectures types à déployer en entreprise ? Quels sont les logiciels grand public qui proposent ce type de service et comment les utiliser ? Comment installer et maintenir gratuitement son propre PBX avec Asterisk ? Que nous réserve la téléphonie du futur ? Telles sont les questions auxquelles ce livre tente d'apporter une réponse.
Cette seconde édition s'enrichit de nombreux compléments et exemples sur les dernières évolutions des technologies et des solutions logicielles et inclut, en particulier, un nouveau chapitre dédié à l'architecture IMS (IP Multimedia Subsystem).Note de contenu : Sommaire:
* Théorie de la ToIP:o Contraintes de la ToIP- La signalisation H.323-Le protocole SIP- Le protocole MGCP- La qualité de service
- Architecture et sécurité
* Pratique de la ToIP:La ToIP sur softphone- Skype- Windows Live Messenger et Yahoo! Messenger-Jabber et Google Talk
- Asterisk-La téléphonie chez les fournisseurs d'accès
o Filtrages des flux de ToIP
* Conclusion:Les cinq problèmes clés de la ToIP-L'architecture IMS
* Annexes :Références -IndexExemplaires
Code-barres Cote Support Localisation Section Disponibilité Etat_Exemplaire 051919 681.3.06 OUA Papier Bibliothèque Centrale Electronique Disponible